|
|
|
| Strain-Controlled Fatigue Properties at Room Temperature of a High-Speed Matrix Steel Used as a Cold Forging Tool Material
|
| ZHANG Ying-1, HU Cheng-Liang-1, ZHAO Zhen-1, LI Ai-Ping-2 |
| (1. National Engineering Research Center of Die & Mold CAD, Shanghai Jiaotong University, Shanghai 200030, China; 2. College of Mechanical Engineering, Tongji University, Shanghai 200092, China) |
|
|
|
|
Abstract Static uniaxial tension experiment and strain-controlled tension-compression fatigue experiments were conducted at room temperature to cold forging tool material, a matrixtype high speed steel. Mechanical property parameters under static tension and low cycle fatigue loading conditions were acquired through the experiments. Static monotonic tension strain-stress relationship, cyclic strain-stress relationship and cyclic strain-life relationship of the steel at room temperature were derived from regression of the experiment data. The experimental results show that cyclic softening happens to the tool material at all levels of controlled cyclic strain amplitudes in this study. No visible stress saturation is observed before fatigue failure occurrs. A specimen at the controlled strain amplitude of 1.5% was used as an example to investigate the LCF behavior characteristics of this material. The cyclic stress response shows a variation with three stages: the obvious softening stage, the slow softening stage and the final rupture stage.
|
|
Received: 04 November 2011
Published: 30 October 2012
|
|
|
|
|
|
| [1] |
JIANG Dong-Dong, HONG Fang-Jun, ZHENG Ping. Droplet Oscillations under AC Electrowetting[J]. J. Shanghai Jiaotong Univ.(Sci.) , 2013, 47(04): 513-518. |
| [2] |
HUANG Xiang-Long, ZHANG Xiao-Jing, BAI Guo-Juan, XU Wu, WANG Hai. Residual Strength Analysis of Thin-Walled Structures with Multiple Site Damage Based on Crack Tip Opening Angle Method[J]. J. Shanghai Jiaotong Univ.(Sci.) , 2013, 47(04): 519-524. |
| [3] |
LIU Yi-Peng, HU Xue-Yu, CHEN Jia-Luo, WANG Ping-Yang, DU Chao-Hui. Direct Image Correction Algorithm for PIV Measurement of Flowfield within Circular Tube[J]. J. Shanghai Jiaotong Univ.(Sci.) , 2013, 47(04): 525-532. |
| [4] |
ZHU Han-Hao, PU Sheng-Chun, ZHANG Hai-Gang, LIU Wei, AN Xu-Dong. Verification of the Calculation of Acoustic Field with Typical Bottom Based on Parabolic Equation in Scaled Tank Experiment[J]. J. Shanghai Jiaotong Univ.(Sci.) , 2013, 47(04): 532-537. |
| [5] |
YANG Jing-Jing-1, LIU Yong-Sheng-1, FANG Wen-Jian-1, FANG Jin-1, PENG Lin-1, YANG Zheng-Long-2, GAO Tian-1, GU Min-An-1. Design and Efficiency of Photovoltaic-Thermoelectric Power Generator with Negative Feedback Characteristic[J]. J. Shanghai Jiaotong Univ.(Sci.) , 2013, 47(04): 550-554. |
| [6] |
LIU Chen-Yan-1, 2 , PAN Li-1, 2 , ZI Xiao-Chao-2. A Binary-String-Set-Based Algebraic Framework for Policy Composition[J]. J. Shanghai Jiaotong Univ.(Sci.) , 2013, 47(04): 579-583. |
| [7] |
PENG Yan-Bin-1, ZHENG Zhi-Jun-1, YU Cheng-Bo-2, LI Ji-Ming-3. Automated Negotiation Decision Model Based on Classifier Fusion[J]. J. Shanghai Jiaotong Univ.(Sci.) , 2013, 47(04): 644-649. |
| [8] |
NING Xiao-Lin-1, ZHAO Yi-Fei-2, CHEN Fei-儿1. Index System and Prosperity Indices of Global Shipping Industry and Applied Research[J]. J. Shanghai Jiaotong Univ.(Sci.) , 2013, 47(03): 417-422. |
| [9] |
KONG Xiang-Qiang-1, LIN Lin-1, LI Ying-1, ZHANG Dong-2, YANG Qian-Ming-1. Effect of Refrigerant Charge on the Performance of a Direct Expansion Solar Assisted Heat Pump Water Heater Using R410A[J]. J. Shanghai Jiaotong Univ.(Sci.) , 2013, 47(03): 370-375. |
| [10] |
HUANG Kang, 欧Yang-Guang-Yao , AN Shi-Jie, CHANG Han-Bao. Design and Simulation Research on Double-Staggered Arranged Porous Nozzle[J]. J. Shanghai Jiaotong Univ.(Sci.) , 2013, 47(03): 434-437. |
| [11] |
WANG Lei, GU Meng-Di. Optimal Reinsurance-Investment Strategies in a Mean-Reverting Market[J]. J. Shanghai Jiaotong Univ.(Sci.) , 2013, 47(03): 438-443. |
| [12] |
XIONG Hao, YAN Hui-Li, ZHOU He-Ping, LIU Wu-Sheng. Real-Time Optimization Strategy of the Multi-Period Dynamic Vehicle Routing Problems[J]. J. Shanghai Jiaotong Univ.(Sci.) , 2013, 47(03): 450-453. |
| [13] |
HONG Jiang-Tao-1, YANG Xiao-Yan-1, CHEN Jun-Fang-2. An Empirical Research on the Relationship among Knowledge Management, Knowledge Competence and Core Competence[J]. J. Shanghai Jiaotong Univ.(Sci.) , 2013, 47(03): 444-449. |
| [14] |
LI Bin-a, JI Jian-Hua-a, b , LI Guo-Wei-a. Study on Supply Chain Robustness Index Mode Considering Profits and Risks[J]. J. Shanghai Jiaotong Univ.(Sci.) , 2013, 47(03): 484-488. |
| [15] |
XU Shi-Yin, HUANG Xiu-Chang, HUA Hong-Xing. Study on the Band Structure of Hexagonal Chiral Structures[J]. J. Shanghai Jiaotong Univ.(Sci.) , 2013, 47(02): 167-172. |
|
|
|
|
