Abstract： Pulsed DE-MIG welding is a novel welding method which can realize low heat imput. Aimed at the unstable problem of coupling arc in the pulsed DEMIG welding process, a control scheme was proposed which changed the wire feed speed to adjust the main arc length and to control the stability of the coupling arc. The simulations and welding experiments of control scheme were conducted based on the Matlab/Simulink and xPC target welding experiment system. The simulations showed that the control scheme was effective, and the welding results proved the simulations and a good weld apperance was acquired.
Key words：
［1］Merklein M, Geiger M. New materials and production technologies for innovative lightweight constructions ［J］. Journal of Materials Processing Technology, 2002，45(5)：532536.［2］石常亮, 何鹏, 冯吉才, 等. 铝/镀锌钢板CMT熔钎焊界面区组织与接头性能［J］. 焊接学报, 2006，27(12)：6164.SHI Changliang, HE Peng, FENG Jicai, et al. Interface microstructure and mechanical property of CMT welding brazed joint between aluminum and galvanized steel ［J］. Transactions of the China Welding Institution, 2006，27(12)：6164.［3］Goecke S F. Low energy arc joining process for materials sensitive to heat ［J］. EWM Hightec Welding，2005(11)：15.［4］黄鹏飞, 卢振洋, 高文宁, 等. 钢铝异种金属的低能量焊接法［J］. 机械工程学报，2009，45(11)：295299.HUANG Pengfei，LU Zhenyang，GAO Wenning,et al. Low energy welding technology in bonding steel with aluminum ［J］. Chinese Journal of Mechanical Engineering， 2009，45(11)：295299.［5］石玗，薛诚，钟浩，等. 单旁路耦合电弧GMAW高速焊接工艺［J］. 上海交通大学学报，2010，44 (1)：5053.SHI Yu，XUE Cheng，ZHONG Hao，et al. Highspeed welding technology analysis of double electrode GMAW ［J］. Journal of Shanghai Jiaotong University， 2010，44 (1)：5053.
