|
|
|
| Microstructures and Mechanical Properties of Fe-Cr-C in Situ Synthesis by Electron Beam |
| WU Xiaomin,LU Fenggui,LU Binfeng,YU Hailiang |
| (Shanghai Key Laboratory of Materials Laser Processing and Modification, Shanghai Jiaotong University, Shanghai 200240, China)“ |
|
|
|
|
Abstract Four line rotation scanning” vacuum electron beam was used in this test. Different natures of surface composite layers were in situ synthesized on the lowalloy steel, with four different ratio of Fe/Cr/C alloy powder. Each deposited sample was analyzed with optical microscope (OM), scanning electron microscope (SEM), Xray diffraction (XRD) and surface microhardness testing to study the effect of powder composition on the surface composite layer’s microstructure and mechanical property. The results show that the microstructures of surface composite layers prepared by different ratio Fe/Cr/C powder mixtures vary significantly. As the carbon content increases, the amounts of carbides will be formed higher, and the hardness also increases. The microstructures of the composite layers are martensite structure, hypoeutectic microstructure, eutectic structure and hypereutectic microstructure. It provides an important basis for the FeCrC material to have excellent wearresisting property.
|
|
Received: 18 June 2009
Published: 29 April 2010
|
|
|
|
|
|
| No related articles found! |
|
|
|
|
