微砂轮电化学放电修整技术

Abstract
Figure/Table
References (0)
Related Citation (0)

［1］	FENG J, KIM B, NI J. Modeling of ceramic microgridning by cohesive zone based finite element method ［C］∥ International Manufacturing Science and Engineering. West Lafayette, USA: ASME, 2009: 417427.
［2］	WEI C J, XU K Z, LI R Z, et al. Temperature modeling in end grinding of coated workpieces ［J］. Journal of Shanghai Jiao Tong University (Science), 2010, 15 (3): 319322.
［3］	GUO B, ZHAO Q L. Onmachine dry electric discharge truing of diamond wheels for microstructured surfaces grinding ［J］. International Journal of Machine Tools and Manufacture, 2015, 88 (1): 6270.
［4］	TANG H, DENG Z H, GUO Y S, et al. Depthofcut errors in ELID surface grinding of zirconiabased ceramics ［J］. International Journal of Machine Tools and Manufacture, 2015, 88 (1): 3441.
［5］	DENG H, CHEN G Y, ZHOU C, et al. Processing parameter optimization for the laser dressing of bronzebonded diamond wheels ［J］. Applied Surface Science, 2014, 290 (3): 475481.
［6］	YAO P, WEI W, HUANG C Z, et al. High efficiency abrasive waterjet dressing of diamond grinding wheel ［J］. Advanced Materials Research, 2014, 1017 (9): 243248.
［7］	WUTHRICH R, FASCIO V. Machining of nonconducting materials using electrochemical discharge phenomenon—An overview ［J］. International Journal of Machine Tools and Manufacture, 2005, 45 (9): 10951108.
［8］	JIANG B Y, LAN S H, WILT K, et al. Modeling and experimental investigation of gas film in microelectrochemical discharge machining process ［J］. International Journal of Machine Tools and Manufacture, 2015, 90 (3): 815.
［9］	JUI S K, KAMARAJ A B, SUNDARAM M M. High aspect ratio micromachining of glass by electrochemical discharge machining (ECDM) ［J］. Journal of Manufacturing Processes, 2013, 15 (4): 460466.
［10］	WEI C J, HU D J, XU K Z, et al. Electrochemical discharge dressing of metal bond microgrinding tools ［J］. International Journal of Machine Tools and Manufacture, 2011, 51 (2): 165168.
［11］	蒋毅, 赵万生, 顾琳, 等. 微细电火花加工脉冲电源及其脉冲控制技术［J］. 上海交通大学学报, 2011, 45 (11): 16841694.
	JIANG Yi, ZHAO Wansheng, GU Lin, et al. Research on pulse generator and pulse control technology for micro electrical discharge machining ［J］. Journal of Shanghai Jiao Tong University, 2011, 45 (11): 16841694.
［12］	刘志东, 凌加健, 陈文安, 等. 放电诱导可控烧蚀及电火花修整成形加工试验研究［J］. 电加工与模具, 2013 (5): 2126.
	LIU Zhidong, LING Jiajian, CHEN Wenan, et al. Experimental study on forming processing by controllable sparkinduced combustion and EDM finishing ［J］. Electromachining and Mould, 2013 (5): 2126.
［13］	WEI C J, XU K Z, NI J, et al. A finite element based model for electrochemical discharge machining in discharge regime ［J］. International Journal of Advanced Manufacturing Technology, 2011, 54: 987995.
［14］	JALALI M, MAILLARD P, WUTHRICH R. Toward a better understanding of glass gravityfeed microhole drilling with electrochemical discharges ［J］. Journal of Micromechanics and Microengineering, 2009, 19 (4): 4500145007.
［15］	LAIO Y S, WU L C, PENG W Y. A study to improve drilling quality of electrochemical discharge machining (ECDM) process ［J］. Procedia CIRP, 2013, 6 (7): 609614.
［16］	KUO K Y, WU K L, YANG C K, et al. Wire electrochemical discharge machining (WECDM) of quartz glass with titrated electrolyte flow ［J］. International Journal of Machine Tools and Manufacture, 2013, 72 (18): 5057.