|
|
|
| Optimization of Central Angle of Transition Curve of Cam-Rotor Vane Motor
|
| YUAN Fan1,WANG Xuyong1,ZHANG Wenjun1,TAO Jianfeng1,MIAO Zhonghua2
|
| (1. School of Mechanical Engineering, Shanghai Jiaotong University, Shanghai 200240, China;
2. School of Mechatronic Engineering and Automation, Shanghai University, Shanghai 200072, China) |
|
|
|
|
Abstract
Abstract： The continuous rotary cam-rotor vane motor, a kind of hydraulic servo element to convert fluid potential energy to mechanical energy, is the appropriate actuator for the hydraulic servo system which has good performance requirements. The parameter optimization design method which focuses on the transition curve segment of the camrotor outer contour was proposed herein. The relationships between the pressure angle and the disturbing torque, the flow fluctuation rate, the leakage and the central angle of transition curve were obtained based on theoretical derivation and analyses. Theoretical basis was conducted and optimized parameter of this kind of vane motor was obtained through analytical calculation and simulation. Experimental verification indicated that the camrotor vane motor had a very good servo precision and proved the feasibility and validity of the parameter optimization design method.
|
|
Received: 19 April 2015
Published: 28 May 2016
|
|
|
|
|
|
| [1] |
WU Yizhou,MIAO Rui,GAO Zhe,GU Xiyao,WU Qi,ZHANG Jie. Multi-Dimensional DecisionMaking Analysis Based on Integrated Performance Evaluation
[J]. J. Shanghai Jiaotong Univ.(Sci.) , 2016, 50(05): 742-749. |
| [2] |
ZHANG Yangang，MAO Huping，SU Tiexiong，DONG Xiaorui，WANG Ying，WANG Jun. Method of Equivalent Static Loads Based on Energy Principle and Its Application in Dynamic Optimization Design of Diesel Engine Piston[J]. J. Shanghai Jiaotong Univ.(Sci.) , 2015, 49(09): 1293-1299. |
| [3] |
WANG Yiqinga,ZHANG Tenga,KUANG Xinbina, LU Binghenga,HONG Juna,XU Minglongb. Theoretical and Experimental Research of Frequency Tuning Characteristics of NiTi-Al MMCs Beam[J]. J. Shanghai Jiaotong Univ.(Sci.) , 2015, 49(09): 1300-1305. |
| [4] |
HU Chenqiang,CHEN Yong,LIU Zelin. Functional Representation and Intelligent Synthesis Approach of Multi-Disciplinary Signal Systems[J]. J. Shanghai Jiaotong Univ.(Sci.) , 2014, 48(08): 1142-1148. |
| [5] |
ZHANG Siliang1,ZHU Ping1,CHEN Wei1,2. Robust Design Method Considering Two Sources of Uncertainties and Its Application in Autobody Lightweight Design[J]. J. Shanghai Jiaotong Univ.(Sci.) , 2013, 47(05): 834-839. |
|
|
|
|
