| ［1］ |
LEU D K. A simple dry friction model for metal forming process［J］. Journal of Materials Processing Technology, 2009, 209(5): 23612368.
|
| ［2］ |
RAMEZANI M, RIPIN Z M. A friction model for dry contacts during metal forming processes［J］. The International Journal of Advanced Manufacturing Technology, 2010, 51(1): 93102.
|
| ［3］ |
YEVTUSHENKO A A, IVANYK E G. Stochastic contact model of rough frictional heating surfaces in mixed friction conditions［J］. Wear, 1995, 188(1/2): 4955.
|
| ［4］ |
HA M Y, JUNG M J. A numerical study on threedimensional conjugate heat transfer of natural convection and conduction in a differentially heated cubic enclosure with a heatgenerating cubic conducting body［J］. International Journal of Heat and Mass Transfer, 2000, 43(23): 42294248.
|
| ［5］ |
WAHID S M S, MADHUSUDANA C V. Gap conductance in contact heat transfer［J］.International Journal of Heat and Mass Transfer, 2000, 43(24): 44834487.
|
| ［6］ |
LIU S B, WANG Q. A threedimensional thermomechanical model of contact between nonconforming rough surfaces［J］. Journal of Tribology, 2001, 123(1): 1726.
|
| ［7］ |
SHI L, MAJUMDAR A. Thermal transport mechanisms at nanoscale point contacts［J］. Journal of Heat Transfer, 2002, 124(2): 329337.
|
| ［8］ |
ZHAO J F, WANG A L, YANG C X. Prediction of thermal contact conductance based on the statistics of the roughness profile characteristics［J］. International Journal of Heat and Mass Transfer, 2005, 48(5): 974985.
|
| ［9］ |
FIEBERG C, KNEER R. Determination of thermal contact resistance from transient temperature measurements［J］. International Journal of Heat and Mass Transfer, 2008, 51(5/6): 10171023.
|
| ［10］ |
POLOZINE A, SCHAEFFER L. Influence of the inaccuracy of thermal contact conductance coefficient on the weightedmean temperature calculated for a forged blank ［J］. Journal of Materials Processing Technology, 2008, 195(1/2/3): 260266.
|
| ［11］ |
SALOMONSSON P, OLDENBURG M. Investigation of heat transfer in the press hardening process［EB/OL］.［20160509］. https:∥www.divaportal.org/smash/get/diva2: 1008078/FULLTEXT01.pdf.
|
| ［12］ |
应济, 贾昱, 陈子辰, 等. 粗糙表面接触热阻的理论和实验研究［J］. 浙江大学学报(自然科学版), 1997, 31(1) : 104109.
|
|
YING Ji, JIA Yu, CHEN Zichen, et al. Theoretical and experimental research on the contact thermal resistance between real surface［J］. Journal of Zhejiang University, 1997, 31(1): 104109.
|
| ［13］ |
石零, 余新明, 王惠龄, 等. 固固接触界面热传输研究［J］. 低温与超导, 2008, 36 (10): 1922.
|
|
SHI Ling, YU Xinming, WANG Huiling, et al. The investigation of solidsolid contact interface thermal transfer［J］. Cryogenics and Superconductivity, 2008, 36 (10): 1922.
|
| ［14］ |
CHEN W W, WANG Q J. Thermomechanical analysis of elastoplastic bodies in a sliding spherical contact and the effects of sliding speed, heat partition, and thermal softening［J］. Journal of Tribology, 2008, 130(4): 110.
|
| ［15］ |
LANGE K, PHLANDT K, RAGHUPATHI R S, et al. Handbook of metal forming［M］.New York: Mc Graw Hill, 1985.
|
| ［16］ |
JENG Y R, CHEN J T, CHENG C Y. Theoretical and experimental study of a thermal contact conductance model for elastic, elastoplastic and plastic deformation of rough surfaces［J］. Tribology Letters, 2003, 14(4): 251259.
|
| ［17］ |
SEPEHRI A, FARHANG K. On elastic interaction of nomfinally flat rough surfaces［J］. Journal of Triboloy, 2008, 130(1): 01101410110145.
|
| ［18］ |
JOHNSON K L. Contact mechanics［D］. Cambridge, UK: Cambridge University Press, 1985.
|
| ［19］ |
SINGHAL V, LITKE P J, BLACKA F, et al. An experimentally validated thermomechanical model for the prediction of thermal contact conductance［J］. International Journal of Heat and Mass Transfer, 2005, 48(25/26): 54465459.
|
| ［20］ |
KOGUT L, ETSION I. Elasticplastic contact analysis of a sphere and a rigid flat［J］. Journal of Applied Mechanics, 2002, 69(5): 657662.
|
| ［21］ |
TABOR D. The hardness of metals［M］.Oxford, UK: Clarendon Press, 1951.
|
| ［22］ |
MEHROTRA P K, QUINTO D T. High temperature microhardness profiles of hard CVD coatings［J］. High Temperatures High Pressures, 1986, 18(2): 199210.
|
| ［23］ |
CHANG W R, ETSION I, BOGY D B. Static friction coefficient model for metallic rough surfaces［J］. ASME Journal of Tribology, 1988, 110(1): 5763.
|
| ［24］ |
XU R P, XU L. An experimental investigation of thermal contact conductance of stainless steel at low temperatures［J］. Cryogenics, 2005, 45(10/11): 694704.
|
| ［25］ |
COOPER M G, MIKIC B B, YOVANOVICH M M. Thermal contact conductance［J］. International Journal of Heat and Mass Transfer, 1969, 12(3): 279300.
|
| ［26］ |
KOGUT L, ETSION I. Elasticplastic contact analysis of a sphere and a rigid flat［J］. Journal of Applied Mechanics, 2002, 69(5): 657662.
|
| ［27］ |
LIN L P, LIN J F. An elastoplastic microasperity contact model for metallic materials［J］. Journal of Tribology, 2005, 127(3): 666672.
|
| ［28］ |
TABOR D. Junction growth in metallic friction: The role of combined stresses and surface contamination［J］. Proceeding the Royal of Society A, Mathematical Physical and Engineering Sciences, 1959, 251: 378393.
|
| ［29］ |
JACKSON R L, DUVVURU R S, MEGHANI H, et al. An analysis of elastoplastic sliding spherical asperity interaction［J］. Wear, 2007, 262(1/2): 210219.
|
| ［30］ |
MILLS K C. Recommended values of thermophysical properties for selected commercial alloys［M］. Cambridge, UK: Woodhead, 2002.
|
