CORRECTION

Correction: Surface Patterning of Metal Zinc Electrode with an In-Region Zincophilic Interface for High-Rate and Long-Cycle-Life Zinc Metal Anode

  • Tian Wang 1 ,
  • Qiao Xi 2 ,
  • Kai Yao 3 ,
  • Yuhang Liu 2 ,
  • Hao Fu 4 ,
  • Venkata Siva Kavarthapu 1 ,
  • Jun Kyu Lee 1 ,
  • Shaocong Tang 1 ,
  • Dina Fattakhova-Rohlfing 3 ,
  • Wei Ai , 2, * ,
  • Jae Su Yu , 1, *
Expand
  • 1 Department of Electronics and Information Convergence Engineering, Institute for Wearable Convergence Electronics, Kyung Hee University, Yongin-si, Gyeonggi-do, 17104, Republic of Korea
  • 2 Frontiers Science Center for Flexible Electronics (FSCFE) and Shaanxi Institute of Flexible Electronics (SIFE), Northwestern Polytechnical University (NPU), 127 West Youyi Road, Xi’an, 710072, People’s Republic of China
  • 3 Institute of Energy and Climate Research: Materials Synthesis and Processing (IEK-1), Forschungszentrum Jülich GmbH, 52425, Jülich, Germany
  • 4 School of Chemical Engineering, Sungkyunkwan University, 2066 Seobu-Ro, Jangan-Gu, Suwon-si, Gyeonggi-do, Republic of Korea
Jae Su Yu,

Online published: 2024-02-28

Cite this article

Tian Wang , Qiao Xi , Kai Yao , Yuhang Liu , Hao Fu , Venkata Siva Kavarthapu , Jun Kyu Lee , Shaocong Tang , Dina Fattakhova-Rohlfing , Wei Ai , Jae Su Yu . Correction: Surface Patterning of Metal Zinc Electrode with an In-Region Zincophilic Interface for High-Rate and Long-Cycle-Life Zinc Metal Anode[J]. Nano-Micro Letters, 2024 , 16(1) : 137 . DOI: 10.1007/s40820-024-01377-6

Correction to: Nano-Micro Letters (2024) 16:112 https://doi.org/10.1007/s40820-024-01327-2
In the supplementary information the following corrections have been carried out:
1. Institute of Energy and Climate Research, Materials Synthesis and Processing, Forschungszentrum Jülich GmbH, 52425 Jülich, Germany.
Corrected: Institute of Energy and Climate Research: Materials Synthesis and Processing (IEK-1), Forschungszentrum Jülich GmbH, 52425 Jülich, Germany.
2. Fig. S3 Optical photographic image of the P-Zn electrode before and after In powder modification
Corrected: Fig. S3 Optical photographic images of the P-Zn electrode a before and b after In powder modification.
3. Fig. S6 a SEM image and b optical microscopic image of the Zn deposits on the ZnIn electrode with the areal capacities of 15.0 mAh cm-2
Corrected: Fig. S6 a SEM image and b optical microscopic image of the Zn deposits on the ZnIn electrode with the areal capacity of 15.0 mAh cm-2.
4. Fig. S7 SEM images of Zn deposits on the pristine Zn electrode with the current density of 1.0 mA cm-2 for 5 h
Corrected: Fig. S7 a, b SEM images of Zn deposits on the pristine Zn electrode with the current density of 1.0 mA cm-2 for 5 h.
5. Fig. S9 Contact angles of the a pristine Zn, b P-Zn and c P-Zn electrode with the capacities of 3.0, and d pristine ZnIn electrodes and the ZnIn electrode with the capacities of e 3.0 and f 5.0 mAh cm-2.
Corrected: Fig. S9 Contact angles of the a pristine Zn, b P-Zn and c P-Zn electrode with the capacities of 3.0 mAh cm-2, and d pristine ZnIn electrodes and the ZnIn electrode with the capacities of e 3.0 and f 5.0 mAh cm-2.
6. Fig. S17 The EIS curves of the a pristine Zn and b ZnIn electrodes at different temperatures. c The corresponding desolvation activation energy values of the differnet electrodes
Corrected: Fig. S17 EIS curves of the a pristine Zn and b ZnIn electrodes at different temperatures. c Corresponding desolvation activation energy values of the differnet electrodes.
The original article has been corrected.
Open Access This article is licensed under a Creative Commons Attribution 4.0 International License, which permits use, sharing, adaptation, distribution and reproduction in any medium or format, as long as you give appropriate credit to the original author(s) and the source, provide a link to the Creative Commons licence, and indicate if changes were made. The images or other third party material in this article are included in the article's Creative Commons licence, unless indicated otherwise in a credit line to the material. If material is not included in the article's Creative Commons licence and your intended use is not permitted by statutory regulation or exceeds the permitted use, you will need to obtain permission directly from the copyright holder. To view a copy of this licence, visit http://creativecommons.org/licenses/by/4.0/.
Outlines

/