海洋工程装备设计技术

一种导管架与水下导向桩对接的计算方法

展开
  • 海洋石油工程股份有限公司,天津300451
徐峰(1987—),男,学士,工程师,主要从事海洋工程结构的研究。

收稿日期: 2017-10-25

  修回日期: 2018-01-08

  网络出版日期: 2018-08-08

Study on Calculation Method for Jacket Docking with Subsea Template Guide

Expand
  • Offshore Oil Engineering Co., Ltd., Tianjin 300451, China

Received date: 2017-10-25

  Revised date: 2018-01-08

  Online published: 2018-08-08

摘要

导管架海上安装时,在海床基础上预先设置基盘导向桩,并在导管架上设置套筒,可以有效地辅助导管架精确定位,实现水下井口预钻井,缩短油气田开发周期。针对安装过程中导管架与水下导向桩对接时的相互作用,采用MOSES软件,通过时域模拟,分析对接过程中的运动和碰撞载荷,并将数值分析结果与相关规范计算结果进行了对比。分析结论对于今后的导管架水下对接项目具有一定的参考价值。

本文引用格式

徐峰, 阮胜福, 胡永明, 靳宝旺, 田维兴 . 一种导管架与水下导向桩对接的计算方法[J]. 海洋工程装备与技术, 2018 , 5(3) : 191 -196 . DOI: 10.12087/oeet.2095-7297.2018.03.08

Abstract

For offshore installation of jackets, subsea template guide pre-installed on seabed and sleeves designed on the jacket are beneficial to the rapid and accurate positioning of the jacket. Subsea wellheads can be pre-drilled and the development period of oil and gas field can be shortened by adopting this installation method. To investigate the interaction between jacket and guide pile during docking, MOSES software is used for the analysis of motion and impact load in time domain. The analysis results are compared with the results according to the relevant standards. The conclusions of this research have a certain reference value for the projects using subsea docking installation method.

参考文献

1 张孝卫,刘玉玺,尹汉军,等.导管架对接结构的设计要点[C].第16届中国海洋(岸)工程学术讨论会论文集,2013: 171. Zhang Xiao-wei, Liu Yu-xi, Yin Han-jun, et al. Key points of jacket docking design [C]. Proceedings of the 16th China Ocean and Coastal Engineering Symposium, 2013: 171. 2 耿亚楠.半潜式钻井平台安装水下井口基盘技术分析[J].船海工程,2014,43(6): 122. Geng Ya-nan. Installation technology of the subsea template using semi-submersible drilling platform [J]. Ship & Ocean Engineering, 2014,43(6): 122. 3 刘竞,刘锦昆,李喆,等.新型水下井口基盘模型试验及数值分析[J].中国海洋平台,2009,24(4): 33. Liu Jing, Liu Jin-kun, Li Zhe, et al. Numerical analysis and model test for new subsea wellhead base structure [J]. China Offshore Platform, 2009,24(4): 33. 4 崔书杰,冯春健,路国章,等.井口平台的新型水下基盘结构及其模型分析[J].石油工程建设,2006,32(4): 37. Cui Shu-jie, Feng Chun-jian, Lu Guo-zhang, et al. Application of new type subsea template in wellhead platform in Chengdao Oilfield [J]. Petroleum Engineering Construction, 2006,32(4): 37. 5 郭庆,宋青武,宋波,等.深水导管架海上安装水下基盘对接模拟计算及施工工艺[J].船海工程,2016,45(4): 67. Guo Qing, Song Qing-wu, Song Bo, et al. On docking simulation and technology for the deep water jacket docking with subsea template [J]. Ship & Ocean Engineering, 2016,45(4): 67. 6 魏佳广,韩士强,刘吉林.较深水导管架对接水下井口基盘的关键技术研究及工程应用[J].海洋技术学报,2017,36(2): 95. Wei Jia-guang, Han Shi-qiang, Liu Ji-lin. Gordian technique research and engineering application of the docking between deep-water jacket and underwater wellhead template [J]. Journal of Ocean Technology, 2017,36(2): 95. 7 韩士强,魏佳广,刘吉林.文昌19-1N油田导管架安装技术[J].海洋工程,2014,32(5): 85. Han Shi-qiang, Wei Jia-guang, Liu Ji-lin. Installation techniques of WC19-1N jacket [J]. The Ocean Engineering, 2014,32(5): 85. 8 杨小龙,高定全,董宝辉,等.T型驳运载超大型组块运动特性分析[J].船海工程,2013,42(1): 129. Yang Xiao-long, Gao Ding-quan, Dong Bao-hui, et al. Motion characteristic for transportation of ultra-large topside with T-shape barge [J]. Ship & Ocean Engineering, 2013,42(1): 129. 9 American Petroleum Institute. API RP 2A-WSD. Recommended practice for planning, designing and constructing fixed offshore platforms: working stress design [S]. 2000. 10 王文娟,王树青,李思强.海洋平台浮托安装的数值实验研究[J].中国海洋大学学报,2013,43(3): 86. Wang Wen-juan, Wang Shu-qing, Li Si-qiang. Numerical based AQWA simulation of float-over installation for offshore platform [J]. Journal of Ocean University of China, 2013,43(3): 86. 11 许鑫,杨建民,吕海宁.导管架平台浮托法安装的数值模拟与模型试验[J].上海交通大学学报,2011,45(4): 439. Xu Xin, Yang Jian-min, Lü Hai-ning. Experimental and numerical analysis for floatover installation on jacket [J]. Journal of Shanghai Jiao Tong University, 2011,45(4): 439. 12 杨晓刚.导管架与基盘导向桩的对接数值模拟分析技术[J].中国海上油气(工程),2001,13(2): 17. Yang Xiao-gang. Docking analysis of jacket to template docking pile [J]. China Offshore Oil and Gas (Engineering), 2001,13(2): 17. 13 杨晓刚.导管架与基盘导向桩的对接技术分析[J].中国海洋平台,2001,16(3): 21. Yang Xiao-gang. The joint technique of jacket template guiding plate [J]. China Offshore Platform, 2001,16(3): 21. 14 Det Norske Veritas. Rules for planning and execution of marine operations [S]. 1996. 15 Nobel Denton. Guidelines for lifting operations by floating crane vessels [S]. 2002.
文章导航

/