|
|
Thermo-Drifting Error Modeling of Spindle Based on Combination of Principal Component Analysis and BP Neural Network |
YANG Yi1,YAO Xiaodong1,YANG Jianguo1,ZHANG Yusheng2,YUAN Feng2 |
(1. School of Mechanical Engineering, Shanghai Jiaotong University, Shanghai 200240, China; 2. Shanghai Aerospace Equipments Manufacturer, Shanghai 200240, China)
|
|
|
Abstract In order to improve the prediction accuracy of thermal error model, a data processing method based on the combination of principal component analysis and BP neural network was presented. By using principal component analysis, the amount of temperature variables will be reduced. Then the principal components are employed to train the BP neural network in order to obtain the thermal error model. As the number of inputs is reduced, the train process can be faster and the iteration time can be reduced. In comparison with the network model which uses the critical point temperatures as the input, the
results show that BP neural network thermal error modeling method based on principal component analysis method has advantages of high fitting accuracy and smaller residual error. So this modeling method has both high efficiency and accuracy of compensation.
|
Received: 16 July 2012
Published: 28 May 2013
|
|
|
|
|
[1] |
LI Guilong,DU Shichang. Modeling and Analyzing for Stream of Variations in#br#
Multistage Manufacturing Processes of Cylinder Block[J]. J. Shanghai Jiaotong Univ.(Sci.) , 2017, 51(4): 385-. |
[2] |
. Sphericity Error Estimation Method Based on Spherical Grinding Marks
[J]. J. Shanghai Jiaotong Univ.(Sci.) , 2016, 50(05): 654-659. |
[3] |
TUO Zhanyu,HUANG Yiqiao,SHEN Muwen,YANG Jianguo. Modeling of Geometric and Thermal Complex Positioning Error of CNC Machine Tools Based on Cubic Spline Interpolation
[J]. J. Shanghai Jiaotong Univ.(Sci.) , 2016, 50(05): 668-672. |
[4] |
YAO Xiaodong1,3,HUANG Yiqiao1,MA Xiaobo2,XUE bo3,YANG Jianguo1. Thermal Error Modeling and RealTime Compensation of CNC Machine Tools Based on Time Series Method
[J]. J. Shanghai Jiaotong Univ.(Sci.) , 2016, 50(05): 673-679. |
[5] |
FENG Wenlong,HUANG Yiqiao,TUO Zhanyu,LI Huimin,YANG Jianguo. Modeling of Thermally Induced Grating Positioning Error of Large Machine Tools Based on Temperature Integral Method [J]. J. Shanghai Jiaotong Univ.(Sci.) , 2016, 50(05): 710-715. |
[6] |
MA Chi,ZHAO Liang,MEI Xuesong,SHI Hu,YANG Jun. Thermal Error Modeling of Machine Tool Spindle Based on Particle Swarm Optimization and Neural Network[J]. J. Shanghai Jiaotong Univ.(Sci.) , 2016, 50(05): 686-695. |
[7] |
HUANG Shouguo1,CHEN Jianduan2. High-Precision and Fast Evaluation of Spatial Straightness Error
of 3D Coordinate Point Set[J]. J. Shanghai Jiaotong Univ.(Sci.) , 2016, 50(05): 730-735. |
[8] |
JI Liangbo. Precision Prediction Model in Fused Deposition Modeling of Three-Dimensional Printing Based on Wavelet Neural Network[J]. J. Shanghai Jiaotong Univ.(Sci.) , 2015, 49(03): 375-378. |
[9] |
YANG Jun,MEI Xuesong,ZHAO Liang,MA Chi,FENG Bin,SHI Hu. Thermal Error Modeling of a Coordinate Boring Machine Based on Fuzzy Clustering and SVM[J]. J. Shanghai Jiaotong Univ.(Sci.) , 2014, 48(08): 1175-1182. |
[10] |
ZOU Jingming1,CHU Guoping1,LIANG Shuyong2,YIN Guoli2. Multivariable Robust Locating Scheme Design of Body Parts
[J]. J. Shanghai Jiaotong Univ.(Sci.) , 2013, 47(09): 1353-1357. |
[11] |
ZHAO Feia,MEI Xuesonga,b,JIANG Gedonga,b,TAO Taoa,SHI Jianqianga. Modeling and Characters Analysis of Assembly Error of Numerical Control Machine Tool[J]. J. Shanghai Jiaotong Univ.(Sci.) , 2013, 47(05): 703-708. |
[12] |
HUANG Jian,SONG Aiping,TAO Jianming,YIN Weizhong. Smoothing Transfer for the Corner of Adjacent NC Processing Segment[J]. J. Shanghai Jiaotong Univ.(Sci.) , 2013, 47(05): 734-739. |
[13] |
LUO Rui,XU Liming,ZHA Tijian,YANG Ziqi,SHI Lun,HU Dejin. Modeling and Simulation of Surface Roughness for Spherical Grinding[J]. J. Shanghai Jiaotong Univ.(Sci.) , 2013, 47(05): 709-714. |
[14] |
JIANG Hui,YANG Jianguo,LI Zihan,YAO Xiaodong. Application of Real Time Compensation with Combinative Thermal Error Prediction Model Based on Error Separation on CNC Machine Tools[J]. J. Shanghai Jiaotong Univ.(Sci.) , 2013, 47(05): 744-749. |
[15] |
LIU Yin-Hua, JIN Sun. Bayesian Networks Modeling Based on Small Samples for VariationSource Diagnosis[J]. J. Shanghai Jiaotong Univ.(Sci.) , 2012, 46(05): 701-705. |
|
|
|
|