[1] |
HUANG Chengjun, ZHU Tianyi, SONG Xiaobing.
In-Plane Yield Criterion of Steel-Concrete-Steel Unit Panel
[J]. Journal of Shanghai Jiao Tong University, 2022, 56(4): 422-430.
|
[2] |
WANG Yecheng, LI Yang, ZHANG Di, YANG Yue, LUO Zhen.
Resistance Element Welding of Carbon Fiber Reinforced Thermoplastic Composites to High-Strength Steel
[J]. Journal of Shanghai Jiao Tong University, 2022, 56(10): 1349-1358.
|
[3] |
WANGJuan, YANG Mingwang, ZHENG Maoyao, LIULingyun, ZHAOLijun.
Application of High Strength Steelin Construction
of Large Semi-Submersible Platforms
[J]. Ocean Engineering Equipment and Technology, 2022, 9(1): 27-31.
|
[4] |
LIU Hao , ZHANGNing , WANG Huoping , ZHU Liyun , ZHANG Yu .
A Method for Improving the Motion Performance of Steel Catenary Riser by Adding Inertia Bodies to the Sagbend Section
#br#
[J]. Ocean Engineering Equipment and Technology, 2022, 9(1): 37-45.
|
[5] |
WANG Qiongyan (王琼燕), LIN Wenhu (林文虎),LI Fang∗ (李芳), SHEN Chen (沈忱), HUA Xueming (华学明).
Influence of Thermal Modification on Al-Si Coating of Hot-Stamped 22MnB5 Steel: Microstructure, Phase Transformation, and Mechanical Properties
[J]. J Shanghai Jiaotong Univ Sci, 2021, 26(6): 747-756.
|
[6] |
YU Xiaokang (俞小康), YE Jia (叶佳), WU Chunxiang (吴春祥), MA Guohong∗ (马国红).
Effect of Cu Addition on the Microstructure and Mechanical Properties of U-MIG Welds on Galvanized Steel Sheets
[J]. J Shanghai Jiaotong Univ Sci, 2021, 26(6): 757-764.
|
[7] |
JIN Hui∗ (靳慧), MO Jianhua (莫建华), SUN Sijia (孙思嘉), ZHAO Jing (赵静).
Experimental Study on Medium and Low Cycle Fatigue Properties of Cast Steel GS20Mn5V
[J]. J Shanghai Jiaotong Univ Sci, 2021, 26(6): 765-773.
|
[8] |
JIANG Yihan, WU Jiasong, WANG Wurong, WEI Xicheng.
Effect of Mold Heating on High-Temperature Friction and Wear Characteristics of Uncoated 22MnB5 Boron Steel
[J]. Journal of Shanghai Jiao Tong University, 2021, 55(3): 258-264.
|
[9] |
MA Guohong (马国红), LI Jian (李健), HE Yinshui (何银水), XIAO Wenbo (肖文波).
Weld Geometry Monitoring for Metal Inert Gas Welding Process with Galvanized Steel Plates Using Bayesian Network
[J]. J Shanghai Jiaotong Univ Sci, 2021, 26(2): 239-244.
|
[10] |
HUA Ying, HE Jun, ZHAO Jincheng, ZOU Jiexin, ZHANG Jingjing, RUAN Shipeng.
Risk-Based Evacuation Model for Steel Platform Formwork in Skyscraper Construction and Its Application
[J]. Journal of Shanghai Jiao Tong University, 2021, 55(11): 1380-1391.
|
[11] |
YANG Hao, WANG Huamiao, LI Dayong.
Crystal Plasticity Modeling of Tension Process of QP980 Steel
[J]. Journal of Shanghai Jiao Tong University, 2021, 55(11): 1476-1482.
|
[12] |
ZHOU Min, GAO Mingze, LI Chuang, WANG Liancheng.
Cargo Hold Structure Optimization of Small and Medium-Sized Duplex Stainless Steel Chemical Tankers
[J]. Journal of Shanghai Jiao Tong University (Science), 2020, 25(3): 340-351.
|
[13] |
DING Kewei, LIU Jianhua, REN Jianwei, MA Wei .
Dynamic Responses of Cellular Metal-Filled Steel Beam-Column Joint Under Impact Loading
[J]. Journal of Shanghai Jiao Tong University (Science), 2020, 25(3): 384-393.
|
[14] |
REN Chong,LIU Qiuting,WANG Binhua,DAI Liusi.
Numerical Analysis and Design Method of Cold-Formed Thin-Walled
C-Section Steel Perforated Member
[J]. Journal of Shanghai Jiaotong University, 2020, 54(10): 1084-1093.
|
[15] |
.
[J]. Machine Design & Research, 2020, 36(01): 206-209+215.
|