海洋工程装备与技术 ›› 2016, Vol. 3 ›› Issue (3): 184-188.

• 海洋工程装备设计技术 • 上一篇    下一篇

深水自由站立式立管壁厚及材料设计方法研究

黄钰   

  1. 海洋石油工程股份有限公司;
  • 收稿日期:2016-05-20 出版日期:2016-06-25 发布日期:2017-11-01
  • 作者简介:黄钰(1985—),男,工程师,主要从事海底管道及立管设计工作。
  • 基金资助:
     

The Investigation of FSHR Wall Thickness and Material Selection Method

HUANG Yu   

  1. Offshore Oil Engineering Co.,Ltd., Tianjin 300451, China
  • Received:2016-05-20 Online:2016-06-25 Published:2017-11-01
  • Supported by:
     

摘要: 针对深水自由站立式立管壁厚及材料初步选择方法,分别从设计流程、设计载荷、设计工况等方面进行了研究,并在壁厚选择的计算原理上结合设计规范进行了深入的讨论。同时,简要介绍了自由站立式立管的结构组成及分类。最后,结合计算实例,对自由站立式立管的壁厚初步选择方法进行了介绍。

Abstract: The selection method for wall thickness and material of free standing hybrid riser (FSHR) is introduced from the aspects of design procedure, design load, design case and so on. Especially, the calculation principle is summarized according to the design code. The structure and description for FSHR are also described. An example of FSHR wall thickness selection is shown to give a further explanation.

中图分类号: