海洋工程装备与技术

海洋工程装备与技术 ›› 2016, Vol. 3 ›› Issue (6): 389-392.

• 海洋工程自动化 • 上一篇    

基于API规范的组合梁构件预套料软件开发

卫旭敏, 张强, 张传荣, 陈程, 杜洋洋, 陈怀琪   

  1. 中海福陆重工有限公司;海洋石油工程(珠海)有限公司;
  • 收稿日期:2016-09-25 出版日期:2016-12-25 发布日期:2017-08-14
  • 作者简介:卫旭敏(1986—)，男，工程师，主要从事海洋工程建造技术方面的研究。
  • 基金资助:
     

 Software Development of Pre-Nesting for Composite Beam-Steel Based on API Standards

 WEI Xu-ming, ZHANG Qiang, ZHANG Chuan-rong, CHEN Cheng, DU Yang-yang, CHEN Huai-qi   

  1.  COOEC-FLUOR Heavy Industries Co., Ltd., Zhuhai, Guangdong 519050, China; Offshore Oil Engineering (Zhuhai) Co., Ltd., Zhuhai, Guangdong 519050, China
  • Received:2016-09-25 Online:2016-12-25 Published:2017-08-14
  • Supported by:
     

PDF (PC)

60

摘要： 基于美国石油学会(API)规范对组合梁预制的要求和Visual Basic(VB)编程语言,通过型钢排版原理构建组合梁排版算法模型,编写完成了一套集合材料估算和套料校核的软件BYMAX 1.0。该软件主要功能分为两部分,第一部分可以对组合梁的采办用量进行估算,实现采办过程的标准化;第二部分在AutoCAD二次开发的基础之上构建预套料模块,并通过生成的套料排版图实现对第一部分估算结果的校核,保证采办工作的准确性,提高文件校核工作的效率。

Abstract:  Based on the requirements from American Petroleum Institute (API) standards and a theory of pre-nesting for section steel, a calculation model of pre-nesting for composite beam-steel is given by the Visual Basic (VB) computer language. The software of purchase and pre-nesting is then developed, which is named BYMAX 1.0. The main functions can be summarized as below. The first part is to calculate the size and number of steel plates with a smart and high-speed process. And the second part is to check the results and to show the nesting pictures by calling AutoCAD. This part can guarantee the accuracy of the previously obtained results.

中图分类号: