海洋工程装备与技术 ›› 2017, Vol. 4 ›› Issue (3): 168-172.

• 海洋工程装备制造材料与设计技术 • 上一篇    下一篇

 新型补口工艺在海底管道铺设中的应用

 刘有利, 熊睿, 袁举洋, 洪森   

  1.  海洋石油工程股份有限公司,天津 300451
  • 收稿日期:2017-04-07 出版日期:2017-06-25 发布日期:2017-08-11
  • 作者简介:刘有利(1982—),男,硕士,工程师,主要从事防腐设计方面的研究。
  • 基金资助:
     

 Application of New Field Joint Coating Process to Subsea Pipeline Laying

 LIU You-li, XIONG Rui, YUAN Ju-yang, HONG Sen   

  1.  Offshore Oil Engineering Co., Ltd., Tianjin 300451, China
  • Received:2017-04-07 Online:2017-06-25 Published:2017-08-11
  • Supported by:
     

摘要:  国内传统海底管道的铺设多采用手工补口,效率较低,而热收缩带补口施工质量会影响补口的长期可靠性。针对手工补口存在施工困难以及补口质量不稳定等问题,研究并引进新型机械化补口设备。通过实践经验表明,机械化补口设备能完成喷砂、预热、收缩、回火等工序的自动化操作,有效保证了热收缩带作为主涂层补口材料的安装质量,提高了补口效率,从而节省了大量的工程成本。

Abstract:  The traditional field joint coating (FJC) is applied by manual process, which shows low efficiency and affects the long-term reliability due to the unstable quality for heat shrinkable sleeve (HSS). Since the manual FJC was unsatisfying, more advanced equipment emerged. The practice from project shows that the FJC installation machinery could accomplish the automation of blast cleaning, preheating, shrinking and post heating, which guarantees the quality of the HSS and reduces the cost of offshore installation.

中图分类号: