Research of Multi-Stage CFU Process for Produced Water Treatment in Offshore Heavy Oilfield

doi:10.12087/oeet.2095-7297.2018.01.04

Abstract

Abstract: Research is carried out according to the data from a multi-stage compact flotation unit （CFU） experiment on a floating produced, storage and offloading unit （FPSO） in a heavy oilfield, as well as the running data of CFU on a wellhead platform in a heavy oilfield. The oil removal rate of two-stage CFU is high, according to the experiment data from FPSO. The oil content in produced water after three-stage CFU on the wellhead platform is decreased to about 27 mg/L. So, the multi-stage CFU can achieve a good result in offshore heavy oilfield. A two-stage CFU can replace corrugated plate interceptor and gas floator. Besides, the multi-stage CFU is small and light, which is suitable to offshore oilfields.

CLC Number:

TE52

WANG Hai-yan, WANG Chun-sheng, ZHANG Ming, SHANG Chao, SUN Hong-hui, ZHENG Xiao-peng. Research of Multi-Stage CFU Process for Produced Water Treatment in Offshore Heavy Oilfield[J]. Ocean Engineering Equipment and Technology, 2018, 5(1): 16-19.

References

1 海洋石油工程设计指南编委会. 海洋石油工程设计概论与工艺设计［M］. 北京：石油工业出版社, 2007: 325. Editorial Committee of Guidelines for Offshore Petroleum Engineering Design. Introduction and process design for offshore petroleum engineering design ［M］. Beijing： Petroleum Industry Press, 2007: 325. 2 陈家庆,蔡小垒,尚超,等. 旋流气浮一体化技术在低含油污水处理中的应用［J］. 石油机械, 2013, 41(9)： 62. Chen Jia-qing， Cai Xiao-lei， Shang Chao， et al. Application of cyclonic floatation integrated technology in low oil content sewage treatment ［J］. China Petroleum Machinery， 2013, 41(9)： 62. 3 李跃喜,熊友明. 紧凑型气浮装置在海上FPSO生产水处理中的应用［J］. 油气田地面工程, 2017, 36(3)： 45. Li Yue-xi， Xiong You-ming. The application of integrated air flotation unit in the offshore FPSO water treating system ［J］. Oil-Gasfield Surface Engineering， 2017, 36(3)： 45. 4 陈家庆,韩旭,梁存珍. 海上油田含油污水旋流气浮一体化处理设备及其应用［J］. 环境工程学报, 2012, 6(1)： 87. Chen Jia-qing， Han Xu， Liang Cun-zhen. Compact flotation unit and its application in offshore produced water treatment ［J］. Chinese Journal of Environmental Engineering， 2012, 6(1)： 87. 5 尚超,王春升,郑晓鹏,等. 海上生产水处理用紧凑型气浮技术研究［J］. 工业水处理, 2015, 35(4)： 81. Shang Chao， Wang Chun-sheng， Zheng Xiao-peng， et al. Research on the compact gas flotation technique applied to the treatment of offshore produced water ［J］. Industrial Water Treatment， 2015, 35(4)： 81. 6 王春升.秦皇岛32-6油田工艺系统设计的分析［J］. 中国海上油气（工程）, 2002, 14(4)： 11. Wang Chun-sheng. Design of process systems of QHD 32-6 Oilfield ［J］. China Offshore Oil and Gas (Engineering), 2002, 14(4)： 11.

[1]	JIANG Wei. Research and Application of Drill String Torsional Vibration in Deepwater Drilling While Jetting the Conductor [J]. Ocean Engineering Equipment and Technology, 2019, 6(1): 450-456.
[2]	MA Yong-qi, YANG Jin, SHI Shan-shan, HU Nan-ding, YANG Guo-dong, LIU Xun. Influence of Shallow Gas Formation in the Bohai Sea on Penetration of Jack-up Drilling Platform [J]. Ocean Engineering Equipment and Technology, 2018, 5(增刊): 10-14.
[3]	TANG Yi-jia, MA Tian-shou, HE Yu-fa, CHEN Ping. Research on Temperature Distribution Calculation Model for Two-Phase Flow in Deepwater Wellbore [J]. Ocean Engineering Equipment and Technology, 2018, 5(增刊): 204-208.
[4]	YAN Wei-feng, YUAN Ze-ming, HE Peng-fei, SHI Wen-zhuan. Recovery Technology of 339.7 mm Casing of A10 Well in the East China Sea [J]. Ocean Engineering Equipment and Technology, 2018, 5(1): 30-35.
[5]	WANG Xi-jie. Treatment and Analysis of Sticking Accident of an Exploration Well in Ningbo 11-1 [J]. Ocean Engineering Equipment and Technology, 2018, 5(1): 36-41.
[6]	WANG Yun-hai, HE Peng-fei, LI Jun-bao, WAN Xiang, YUAN Ze-ming. Calculation and Application of Reverse Circulation Well Killing Method in Offshore TCP Perforation [J]. Ocean Engineering Equipment and Technology, 2017, 4(5): 266-270.
[7]	HAO Xi-ning, SUN Li-li, YIN Zhi-ming, WANG Yu. Feasibility Analysis of Surface Casing Depth Optimization in Deepwater Drilling [J]. Ocean Engineering Equipment and Technology, 2017, 4(5): 271-275.
[8]	JIANG Wei. Research and Application of the Heading Determination Method for Semi-Submersible Drilling Platform in Internal Wave Current [J]. Ocean Engineering Equipment and Technology, 2016, 3(6): 331-337.
[9]	HE Peng-fei. Application and Development of Extended Reach Well Techniques in Oilfields in Bohai [J]. Ocean Engineering Equipment and Technology, 2016, 3(6): 361-366.
[10]	Xi-qia CHEN, Lei-jian SONG, Xia-ying DU, Jun WAN, Shi-xiao FU. Global Response Analysis for the Deep-Sea Umbilical [J]. Ocean Engineering Equipment and Technology, 2015, 2(2): 111-117.
[11]	Qin LÜ, De-tang LI, Da-te LI, Wen-tao TANG, Wei-nan CAO. Diesel Energy-Saving Model Design of Offshore Platform [J]. Ocean Engineering Equipment and Technology, 2014, 1(2): 180-183.
[12]	Bin CHEN, Feng SU, Kai ZHOU, Dong-dong LIU, Hua-jian LIU. Test Technology of Subsea Production System [J]. Ocean Engineering Equipment and Technology, 2014, 1(2): 146-150.
[13]	Lei-xiang SHENG, Liang-bin XU, Shi-quan JIANG, Xun-ke LI, Yan-feng CAO. Analysis on Critical Points of Completion Design of Thermal Recovery Well [J]. Ocean Engineering Equipment and Technology, 2014, 1(2): 111-115.