In the offshore oil and gas development, casing recovery technology is mainly used in sidetracking and abandoned well shaft treatment. Sidetracking technology is gradually increasingly used in the oil and gas fields of the East China Sea, mainly to improve the production and recovery, and realize the reuse of well slots. But in the casing recovery technology, new technical problems are also emerging, such as the difficulty in recovering large size casing, the uncertainties in the annulus cement quality between borehole and casing and in the annulus medium distribution, as well as the deviation of the casing from the center position. In the East China Sea, the recovery of a large size casing is successfully performed. During the recovery process of the 339.7 mm casing of A10 well, some techniques are used, including the isolation scanner (IBC) logging technology, the optimization of cutting position, and the application of fishing, casing milling, milling and other processes. The successful recovery could provide conditions for subsequent sidetrack drilling. These technologies can also be used for similar operations.
YAN Wei-feng, YUAN Ze-ming, HE Peng-fei, SHI Wen-zhuan
. Recovery Technology of 339.7 mm Casing of A10 Well in the East China Sea[J]. Ocean Engineering Equipment and Technology, 2018
, 5(1)
: 30
-35
.
DOI: 10.12087/oeet.2095-7297.2018.01.07
1 魏刚,邵明仁,张春琳. 南堡35-2-A6mh井复杂套铣工艺探讨［J］. 海洋石油, 2010, 30(1): 101.
Wei Gang, Shao Ming-ren, Zhang Chun-lin. Discussion on complex casing milling technology in Nanpu 35-2-A6mh well ［J］. Offshore Oil, 2010, 30(1): 101.
2 袁则名,和鹏飞. 基于多底井的油田滚动评价和开发一体化技术［J］. 石油化工与应用, 2017, 36(2): 64.
Yuan Ze-ming, He Peng-fei. The technology of multiple bottom well for exploration and development ［J］. Petrochemical Industry Application, 2017, 36(2): 64.
3 章桂庭,郭树彬,雷刚,等. 深斜井永久式封隔器两种套铣方式风险分析与优化措施［J］. 石油钻采工艺, 2007, 29(5): 111.
Zhang Gui-ting, Guo Shu-bin, Lei Gang, et al. Risk analysis and measurements optimization for two casing milling modes of permanent packer in deep deviated well ［J］. Oil Drilling & Production Technology, 2007, 29(5): 111.
4 和鹏飞,袁则名. 海洋油气开采低产水平井同层侧钻技术的分析与实践［J］. 海洋工程装备与技术, 2017, 4(2): 69.
He Peng-fei, Yuan Ze-ming. Application of sidetracking technology to same layer of inefficient wells in offshore oil and gas exploitation ［J］. Ocean Engineering Equipment and Technology, 2017, 4(2): 69.
5 苏庆民. 洼60-H26水平井套铣打捞技术［J］. 石油钻探技术, 2006, 34(6): 80.
Ss Qing-min. Casing-milled and fishing technology used in the Wa60-H26 horizontal well ［J］. Petroleum Drilling Techniques, 2006, 34(6): 80.
6 晏小和,聂家政. 套铣和倒扣联作技术在DH1井的应用［J］. 石油天然气学报, 2010, 32(3): 300.
Yan Xiao-he, Nie Jia-zhen. Application of combined technology of casing milling and reverse cutting in DH1 well ［J］. Journal of Oil and Gas Technology, 2010, 32(3): 300.
7 袁则名,和鹏飞. 复杂断块油田钻井废弃物回注方案优选与工程实践［J］. 海洋工程装备与技术, 2017, 4(1): 7.
Yuan Ze-ming, He Peng-fei. Drill cuttings reinjection in complex fault block oilfield: layer selection scheme optimization and engineering practice ［J］. Ocean Engineering Equipment and Technology, 2017, 4(1): 7.
8 牛洪波,胥豪,陈建隆. 胜利滩海油田表层套管钻井技术研究与应用［J］. 石油钻探技术, 2007, 35(5): 32.
Niu Hong-bo, Xu Hao, Chen Jian-long. Research and application of surface casing drilling technology in Shengli Offshore Oilfield ［J］. Petroleum Drilling Techniques, 2007, 35(5): 32.
9 姜伟. 套管钻井技术在我国海上钻井作业中的应用［J］. 中国海上油气(工程), 2003, 5(2): 32.
Jiang Wei. Application of casing drilling technique in the China offshore operation ［J］. China Offshore Oil and Gas (Engineering), 2003, 5(2): 32.
10 和鹏飞,侯冠中,朱培,等. 海上914.4 mm井槽弃井再利用实现单筒双井技术［J］. 探矿工程(岩土钻掘工程), 2016, 43(3): 45.
He Peng-fei, Hou Guan-zhong, Zhu Pei, et al. Twinhole-in-monobore technology completed on abandoned 914.4 mm offshore well slot ［J］. Exploration Engineering (Rock & Soil Drilling and Tunneling), 2016, 43(3): 45.
