组织工程与重建外科杂志

组织工程与重建外科杂志 ›› 2015, Vol. 11 ›› Issue (1): 45-46.doi: 10.3969/j.issn.1673-0364.2015.01.014

• 论著 • 上一篇    下一篇

自体脂肪移植在颞部凹陷填充中的应用

吴为民，温立霞，吴磊   

  1. 三峡大学人民医院；宜昌市第一人民医院整形外科
  • 发布日期:2020-07-23

Autologous Fat Grafting in the Augmentation of Temporal Depression

WU Weimin,WEN Lixia,WU Lei   

  1. Department of Burn and Plastic Surgery, The People’s Hospital of Three Gorges University, The First People’s Hospital of Yichang;
  • Published:2020-07-23

摘要： 目的探讨自体脂肪移植在颞部凹陷填充中的应用。方法采用低压抽吸、低速离心、多点、多隧道、多层次、少量注射(Low-pressure liposuction,Low-speed centrifuge,Multi-points,Multi-tunnels,Multi-layers and Low-amounts injection,3L3M)的自体脂肪移植技术,对36例颞部凹陷患者行多区域脂肪移植。1颞区在皮下层、颞浅筋膜层、肌肉层行填充;2额区在额肌皮下层和额肌下行填充;3眶外侧区于皮下层行极少量的脂肪填充。结果 36例颞部凹陷患者经脂肪填充后外形均有明显改善。随访3~24个月,各填充区外形保持较好,移植脂肪吸收率较低,三方评价满意率分别为83.3%、88.9%及86.1%。结论采用3L3M的自体脂肪移植技术填充颞部凹陷,可以得到满意的效果。

关键词: 颞部凹陷, 填充, 自体脂肪移植

Abstract: Objection To explore the application of autologous fat grafting in the augmentation of temporal depression. Methods Autologous fat grafting technique of 3L3M was performed to 36 patients with temporal depression adopting low-pressure liposuction, low-speed centrifuge, multi-points, multi-tunnels, multi-layers and low-amounts injection (3L3M).①The temple area was injected through subcutaneous layer, superficial fascia layer and muscle layer. ②The frontal area was injected through subcutaneous layer and subfrontalis layer.③Orbital outer area was injected through subcutaneous layer with little fat. Results The apperence of all 36 patients was improved clearly after autologous fat grafting. All the patients were followed up for three months to two years, the appearance of each area of temple augmented were satisfied and the absorbtion of the grafted fat was low. The satisfaction rates of patient, plastic surgeon and the third person were 83.3%, 88.9%and 86.1%respectively. Conclusion The 3L3M autologous fat grafting technique is effective in the augmentation of temporal depression.

Key words: Temporal depression, Augmentation, Autologous fat grafting

中图分类号: