3D Printing in Medicine

doi:10.3969/j.issn.1673-0364.2014.01.001

主管：上海交通大学
主办：上海交通大学医学院附属第九人民医院
ISSN 1673-0364 CN 31-1946/R

Journal of Tissue Engineering and Reconstructive Surgery ›› 2014, Vol. 10 ›› Issue (1): 1-7.doi: 10.3969/j.issn.1673-0364.2014.01.001

• Review • Next Articles

3D Printing in Medicine

ZHOU Weimin,MIN Guoquan,LI Xiaoli

Shanghai Industrial Technology Institute;Shanghai Nanotechnology Promotion Center

Published:2020-07-23

Abstract

Abstract: The advantages of 3D printing including personalization, precision and long-range were suitable for its application in the field of medicine. In this paper, the development situation, technical characteristics and medical application of 3D printing (including medical model in vitro, customized medical instruments, artificial organs and tissue, etc) were introduced. Meantime, the research bottleneck and countermeasures of 3D printing in the field of medicine were expounded.

Key words: 3D printing, Medical model in vitro, Customized medical instruments, Artificial organ and tissue

CLC Number:

R319

ZHOU Weimin,MIN Guoquan,LI Xiaoli. 3D Printing in Medicine[J]. Journal of Tissue Engineering and Reconstructive Surgery, 2014, 10(1): 1-7.

[1]	. [J]. Journal of Tissue Engineering and Reconstructive Surgery, 2022, 18(5): 413-.
[2]	CHEN Chen, CHENG Yusheng, HU Xiaojing, et al. Application of 3D printing personalized nasal stent in the correction of secondary nasal deformities after unilateral cleft lip surgery [J]. Journal of Tissue Engineering and Reconstructive Surgery, 2022, 18(5): 419-.
[3]	LU Dezhi 1,2‡ (鲁德志), LI Wentao1‡ (李文韬), WANG Xiaowen2 (王孝文), SONG Yan2 (宋艳), ZHANG Pingping2 (张萍萍), FENG Haiyang2 (冯海洋), WU Yuncheng1 (吴云成), XU Yuanjing3 (许苑晶), LI Tao4 (李涛), MA Zhenjiang1∗ (马振江), WANG Jinwu1,2∗ (王金武). Case Study of a Personalized Scoliosis Brace Based on 3D Printing [J]. J Shanghai Jiaotong Univ Sci, 2022, 27(4): 528-534.
[4]	YU Haiyang, ZHAO Hongbin, LIU Chun, et al. Research progress of cell damage in the process of 3D printing of “bioactive scaffolds”　 [J]. Journal of Tissue Engineering and Reconstructive Surgery, 2022, 18(2): 163-.
[5]	SUN Tiecheng, YANG Bin, WANG Yu, et al. Accuracy analysis of cranio-maxillofacial plastic surgery robot in genioplasty　 [J]. Journal of Tissue Engineering and Reconstructive Surgery, 2022, 18(1): 57-.
[6]	WANG Jinwu,LI Tao,XU Yuanjing,LI Shuai,REN Ya,DAI Kerong. Biological 3D Printing and Organ Reconstruction [J]. Journal of Shanghai Jiao Tong University, 2021, 55(Sup.1): 46-48.
[7]	WU Jinhong,SHI Yi,CHEN Tingzhu,WANG Zhengwu. Opportunities and Challenges of 3D Printing Technology in Future Food Processing Industry· [J]. Journal of Shanghai Jiao Tong University, 2021, 55(Sup.1): 97-99.
[8]	ZHANG Yuan, LI Fanchun, JIA Dejun. Design and 3D Printing Simulation of a Lattice Compressor Impeller [J]. Journal of Shanghai Jiao Tong University, 2021, 55(6): 729-740.
[9]	CHENG Rongshan, (程荣山), JIANG Ziang, (蒋子昂), DIMITRIOU Dimitris, GONG Weihua, (龚伟华), TSAI Tsung-Yuan, (蔡宗远). Biomechanical Analysis of Personalised 3D-Printed Clavicle Plates of Different Materials to Treat Midshaft Clavicle Fractures [J]. J Shanghai Jiaotong Univ Sci, 2021, 26(3): 259-266.
[10]	SUN Binbin (孙彬彬), HAN Yu (韩煜), JIANG Wenbo (姜闻博), DAI Kerong(戴尅戎). 3D Printing Bioink Preparation and Application in Cartilage Tissue Reconstruction in Vitro [J]. J Shanghai Jiaotong Univ Sci, 2021, 26(3): 267-271.
[11]	YANG Chenghao (杨成昊), LU Xinwu (陆信武), JIANG Wenbo (姜闻博), YE Kaichuang (叶开创), ZHAO Zhen (赵振), WANG Xuhui (王旭辉), WANG Penghui (王鹏辉), FEI Yebao (费业宝), WANG Wei (王伟), YIN Minyi (殷敏毅). Application of 3D Digital Reconstruction and Printing to the Diagnosis and Treatment of Iliac Vein Compression [J]. J Shanghai Jiaotong Univ Sci, 2021, 26(3): 312-318.
[12]	LI Xiaomin (李小敏), DAI Xiaoqing(戴晓庆), GUO Jiuhong (郭久红), QU Yang (曲扬), WU Bing (吴兵), LIU Siyu (柳思宇), WAN Daqian (万大千), AI Songtao(艾松涛). Application of 3D Printing and WebGL-Based 3D Visualisation Technology in Imaging Teaching of Ankle Joints [J]. J Shanghai Jiaotong Univ Sci, 2021, 26(3): 319-324.
[13]	SUN Xiaojiang(孙晓江), ZHAO Changqing (赵长清), YANG Erzhu(杨二柱), LI Hua (李华), ZHANG Kai (张凯), CHENG Xiaofei(程晓非), JIANG Wenbo (姜闻博), CHENG Zhihua(程志华), GUO Zhilin (郭智霖), DAI Kerong (戴尅戎), ZHAO Jie (赵杰). Technique Note for Staged Resection of Giant Invasive High-Cervical Schwannoma and Reconstruction of C2—C4 with 3D Printing Technique [J]. J Shanghai Jiaotong Univ Sci, 2021, 26(3): 325-333.
[14]	KAN Tianyou(阚天佑), XIE Kai(谢凯), QU Yang(曲扬), AI Songtao (艾松涛), JIANG Wenbo (姜闻博), WU Haishan (吴海山), WANG Liao(王燎), YAN Mengning(严孟宁). 3D-Printed Porous Titanium Augments for Reconstruction of Massive Bone Defect in Complex Revision Total Knee Arthroplasty: Implant Design and Surgical Technique [J]. J Shanghai Jiaotong Univ Sci, 2021, 26(3): 334-338.
[15]	SUN Xiaojiang (孙晓江), YANG Erzhu (杨二柱), ZHAO Changqing (赵长清), CHENG Xiaofei (程晓非), ZHANG Kai (张凯), TIAN Haijun (田海军), DING Baozhi (丁宝志), LI Hua (李华), JIANG Wenbo (姜闻博), DAI Kerong(戴尅戎), ZHAO Jie(赵杰). Progress in the Application of 3D Printing Technology in Spine Surgery [J]. J Shanghai Jiaotong Univ Sci, 2021, 26(3): 352-360.

3D Printing in Medicine

Knowledge

Abstract

Cite this article

share this article

References

Related Articles 15

Recommended Articles

Metrics

Comments