海洋工程装备与技术

海洋工程装备与技术 ›› 2023, Vol. 10 ›› Issue (2): 8-13.doi: 10.12087/oeet.2095-7297.2023.02.02

• • 上一篇    下一篇

深水半潜式生产平台立柱储油结构设计及应用

刘小燕1 , 冯加果2 , 李达3   

  1. 1. 中海石油(中国)有限公司北京新能源分公司, 北京 102209; 2. 中国海洋石油集团有限公司, 北京 100010; 3. 中海油研究总院有限责任公司, 北京 100028
  • 出版日期:2023-07-02 发布日期:2023-07-02

The Hull Structure Design and Practice of the Condensate Storage Tank of Semi-Submersible Platform

LIU Xiaoyan1 , FENGJiaguo2 , LI Da3   

  1. 1. CNOOC China Limited , Beijing New Energy Company , Beijing102209 , China ; 2. China National Offshore Oil Corporation, Beijing100010 , China ; 3. CNOOC ResearchInstitute , Ltd . , Beijing100028 , China
  • Online:2023-07-02 Published:2023-07-02

PDF (PC)

949

摘要： 目前, 行业内仍缺少将凝析油储存到半潜式平台船体中的经验和实践案例。 本文给出了立柱中储存凝析油时深水半潜式平台船体结构的设计方案。 第一, 立柱凝析油舱周围需要采用双层舱壁(隔离舱) , 隔离舱舱壁之间采用板相连; 第二, 凝析油舱设计压头优化降低了20 m, 比同高度的压载舱仍增大了10 m; 第三, 凝析油舱内设置了上下各空出2 m 的非水密连续舱壁, 经过总体结构强度和疲劳分析, 该舱壁方案可行; 第四, 在立柱底部、 压载舱、凝析油舱底部多考虑2 mm 腐蚀裕量。 本研究可为今后类似设计提供参考。

关键词: 船体结构, 半潜式平台, 凝析油储存, 强度和疲劳, 隔离舱, 设计压头

Abstract: There is little industrial experience and projects for semi-submersible platform with large volume condensate storage tanks. The hull structure design of condensate storage tanks were provided. Firstly, the column was designed with the double-wall voids (cofferdams ) around the condensate tanks and connected with flats with manholes for maintenance access. Secondly, the pressure head of condensate tank was increased by 10 m compared to the ballast tank after optimizing the reduction of 20 m. Thirdly, the bulkheads of condensate tank are non-watertight and continuous, but with the upper and lower 2 m height gaps for the flowing of condensate and gas. Fourth, the additional corrosion margin of 2 mm was added to the boundary of frequently ballast and de-ballast tanks in the nodes and columns. It is a successful practice for other similar design in the future.

Key words: hull structure, semi-submersible platform, condensate oil storage, strength and fatigue, cofferdam, pressure head.

中图分类号: