海洋工程装备与技术

海洋工程装备与技术 ›› 2016, Vol. 3 ›› Issue (4): 257-260.

• 海洋工程自动化与数字化 • 上一篇    下一篇

基于PDMS的支吊架校核系统介绍

郑凯   

  1. 中海油能源发展装备技术有限公司渤海工程技术服务中心;
  • 收稿日期:2016-07-18 出版日期:2016-08-25 发布日期:2017-09-22
  • 作者简介:郑凯(1984—)，男，工程师，主要从事海洋工程平台管道设计及建造工作。
  • 基金资助:
     

Introduction to the Check System for Supports and Hangers Based on PDMS

ZHENG Kai   

  1. Bohai Engineering and Technical Service Center, CNOOC Energy Development Equipment Technology Co., Ltd., Tianjin 300452, China
  • Received:2016-07-18 Online:2016-08-25 Published:2017-09-22
  • Supported by:
     

PDF (PC)

64

摘要： 作为一款三维设计软件,工厂三维布置设计管理系统(PDMS)发展的一个重要方面是用户在使用中的自我不断完善改进。基于PDMS平台,二次开发出一款内嵌式辅助设计支吊架校核软件。使用编制的支吊架载荷计算软件,可自动验算支架载荷,生成最优支架形式,从而提高支吊架设计的安全性,同时降低建造成本、提高经济效益。

Abstract: Plant Design Management System (PDMS) is a threedimensional (3D) design software of AVEVA from UK. The self improvement of the user is an important aspect for the development of PDMS. An embedded aided design software for checking supports and hangers is developed based on PDMS platform. The programmed load computation software for supports and hangers can be used to automatically check the load and output the optimal form of supports and hangers. In this way, the safety of supports and hangers design is improved, the construction cost is reduced, and the economic performance is enhanced.

中图分类号: