悬链系泊系统中的粘接软管

摘要
图/表
参考文献
相关文章
Metrics

全文: PDF(1637 KB) HTML
输出: BibTeX | EndNote (RIS)

摘要

悬链系泊(CALM)系统中的粘接软管是主要的装卸油设施.此类软管主要材质为橡胶材料,通过铺放涂胶织物,缠绕钢丝等加强层,增加其拉伸和弯曲强度.目前,国内海洋工程中对粘接软管的研究和应用较少.通过对CALM系统中两种粘接软管即漂浮软管和水下软管的结构选型,长度和布置形态的研究,提出了软管的结构选型和布置形态的设计方法.最后以水下软管为例进行了静态和动态分析.

	服务

	把本文推荐给朋友
	加入引用管理器
	E-mail Alert
	RSS
	作者相关文章
	王猛
	张捷

关键词 ：单点系泊, 悬链系泊, 粘接软管, 漂浮软管, 水下软管

Abstract：

Bonded hose is the important equipment for oil transportation in catenary anchor leg mooring (CALM) system. Bonded hose is made of elastomer with additional layer such as textile layer impregnated with rubber, steel wire, etc. to improve the axial tensile and bending strength of the hose. There is little research on the bonded hose for offshore oil and gas field in China so far. We present the research on two types of bonded hoses in CALM system: floating hose and marine hose. The investigations on structure and length selection and configuration of two types of hoses are carried out. A design approach for structure selection and configuration determination is proposed. Taking marine hose as an example, the static and dynamic analysis is presented.

Key words： single point mooring catenary anchor leg mooring bonded hose floating hose marine hose

收稿日期: 2015-01-10 出版日期: 2016-03-31

:	TE973
	U656.1+26

作者简介:

作者简介:王猛(1980--),男,硕士,工程师,主要从事海洋石油和天然气管道设计与研究.

引用本文:

王猛, 张捷. 悬链系泊系统中的粘接软管[J]. 海洋工程装备与技术, 2015, 2(1): 40-44.
Meng WANG, Jie ZHANG. Bonded Hose in CALM System. Ocean Engineering Equipment and Technology, 2015, 2(1): 40-44.

链接本文:

https://www.qk.sjtu.edu.cn/oeet/CN/ 或 https://www.qk.sjtu.edu.cn/oeet/CN/Y2015/V2/I1/40

Fig.1 悬链系泊系统

Fig.2 粘接软管典型截面

Fig.3 螺旋钢丝缠绕

Table 1 Yokohama标准软管的操作参数

Table 2 Yokohama标准软管材料

Table 3 软管类型标识

Fig.4 漂浮软管布置

Fig.5 油轮端部漂浮软管

Fig.6 水下软管布置形态

Fig.7 水下软管Orcaflex模型

Table 4 水下软管参数

Table 5 环境参数

Fig.8 静态和动态弯曲半径

Fig.9 静态和动态弯矩

Fig.10 静态和动态有效轴力

[1]	American Petroleum Institute.API Spec 17K, specification for bonded flexible pipe[S]. 2005.
[2]	徐业峻,吕立功,王旭东,等. 海上外输漂浮软管结构设计研究[J]. 船海工程, 2013, 42(2): 118. doi: 10.3963/j.issn.1671-7953.2013.02.036
[3]	Oil Companies International Marine Forum. Prototype rope testing[S]. 1987.
[4]	徐业峻. 海上外输漂浮软管的结构角度设计研究[J].西南石油大学学报(自然科学版), 2013, 35(2): 170. doi:
[5]	The Yokohama Rubber Co.,Ltd.Offshore loading & discharge hose catalog No.MH-001 R1[R].
[6]	Oil Companies International Marine Forum. Guide to purchasing, manufacturing and testing of loading and discharge hoses for offshore moorings[S]. 1991.
[7]	Ziccardi J J.Selection of hose systems for SPM tanker terminals[C]. OTC, 1970: 1152.

Viewed

Full text

Abstract

Cited

Shared

Discussed