Ocean Engineering Equipment and Technology ›› 2024, Vol. 11 ›› Issue (2): 80-86.doi: 10.12087/oeet.2095-7297.2024.02.18

Previous Articles     Next Articles

Research on Rack Phase Difference of Truss-type Jack-up Unit

CHEN Wei, YAN Ming   

  1. Oil Production Services Co., CNOOC Energy Technology & Services Limited, Tianjin 300452, China
  • Online:2024-07-04 Published:2024-07-06

Abstract: Rack phase difference may be produced in the process of positioning of truss-type Jack-up unit, which will cause a significant additional bending moment at the contact position between the legs and the main hull of the unit, resulting in buckling failure of the leg support pipe at the low guiding position of the hull. In the paper, a jack-up unit is taken as the research object, ANSYS software and birth-death element technology is used to forecast RPD value of jack-up unit in the process of lifting hull by 3-D time-domain numerical simulation analysis, which is divided into four main stages according to changes of RPD value. On this basis, the RPD variation characteristics under three wind speed conditions are analyzed, which is helpful to determine the impact of wind speed on RPD in the process of lifting hull. Finally, a set of RPD control method is proposed based on the law of the change of RPD and the stress of the leg in order to monitor RPD of platform leg.

Key words: jack-up unit, rack phase difference, in the process of lifting hull, allowable RPD

CLC Number: