[1] |
ZHANG Ming-hao, TIAN Cong-yong, LI Jia-jun, YANG Qing-feng, LIU Rong-kun, YANG Jian-chang.
Discussion on Dimension Control Measurement Technology of Large Equipment Installation for LNG Core Process Module
[J]. Ocean Engineering Equipment and Technology, 2019, 6(2): 530-535.
|
[2] |
SUN Guo-min, ZHANG Jie, Xü Zhi-hui.
Damage Assessment of In-Service Subsea Pipeline
[J]. Ocean Engineering Equipment and Technology, 2018, 5(6): 400-404.
|
[3] |
Lü Yan, JU Xuan-ze, LI Xiu-feng, LI Gang, DONG Bao-hui, ZHONG Chao-ting.
Construction Conditions and Site Selection of Catenary Anchor Leg Mooring (CALM) for Offshore Oil Terminal
[J]. Ocean Engineering Equipment and Technology, 2018, 5(5): 300-304.
|
[4] |
YU Xi-chong, WANG Chun-sheng, LI Bo, CHENG Bing, LI Yan, WANG Qing.
Pigging Solutions Study of Subsea Tieback Flowline for Deepwater Oil and Gas Fields in the South China Sea
[J]. Ocean Engineering Equipment and Technology, 2017, 4(4): 199-204.
|
[5] |
WU Wei-wu, WANG Dong-bao, ZHAO Li-ming, YUAN Zhen-qin.
Segmented Design and Calculation Method for Printed Circuit Heat Exchanger as LNG Vaporizer
[J]. Ocean Engineering Equipment and Technology, 2016, 3(2): 93-98.
|
[6] |
CHEN Shi-wen, YANG Zhi-xun, RUAN Shi-lun, ZHOU Mao-fu, YUE Qian-jin.
Dimension Sensitivity Analysis of Octagon Tank on Sloshing-Induced Slamming Load Based on Simulation
[J]. Ocean Engineering Equipment and Technology, 2016, 3(1): 39-45.
|
[7] |
Cheng-lin LU, Lan LI, Ping-na SONG, Jing CAO, Yong SHA, Wei-wei ZHOU.
Global Performance Analysis for Deepwater Flexible Riser
[J]. Ocean Engineering Equipment and Technology, 2015, 2(2): 88-92.
|
[8] |
Hai-yuan YAO, Qing-ping LI, Bing CHENG, Shao-kai CHEN, Yong-fei LIU.
Analysis of Influence Factors for Pigging Effectiveness of Bypass Pig in Natural Gas Liquid Pipelines
[J]. Ocean Engineering Equipment and Technology, 2015, 2(1): 32-35.
|
[9] |
Jing YE, Lie-jin GUO, Sen-lin CHEN, Qing-ping LI, Nai-liang LI.
Comparative Experimental Study on Severe Slugging Characteristics in Different Riser Shapes
[J]. Ocean Engineering Equipment and Technology, 2015, 2(1): 18-22.
|
[10] |
Jiang-hui YANG.
LNG Fueled Ship Filling Technology
[J]. Ocean Engineering Equipment and Technology, 2014, 1(3): 263-266.
|
[11] |
Jiang-hui YANG, Yong-chun XIE, Guang DU, Xiao-hua JIANG, Xiao-gang ZHANG, Geng XU, Jia WANG.
Application of SmartPlant Spoolgen Combined with CMS in Pipeline Fabrication Design of Offshore Oil Engineering
[J]. Ocean Engineering Equipment and Technology, 2014, 1(3): 258-262.
|
[12] |
Yun-fei WANG, Da-gang ZHANG, Yong-tian KANG, Hao JIN.
Study on Oil Spill Risk Management and Prevention for Single-Point Mooring Systems
[J]. Ocean Engineering Equipment and Technology, 2014, 1(3): 200-206.
|
[13] |
Lei LI, Xing-peng XIAO.
Application of He-N2 Leakage Detection to High Pressure Oiland Gas Pipeline
[J]. Ocean Engineering Equipment and Technology, 2014, 1(2): 136-139.
|
[14] |
Wei-feng WANG, Dong-jie LIU, Zheng-she PEI, Jing CAO, Yong SHA, Li-wei LI.
Extruding Research of PVDF Used in Large Diameter Flexible Pipe as Inner Pressure Sheath
[J]. Ocean Engineering Equipment and Technology, 2014, 1(1): 76-79.
|
[15] |
Zhi-jun WEI, Shi-lun RUAN, Qian-jin YUE, Bin XIE.
Experimental Investigation of Liquid Sloshing Impact Load in a Large-Scale Prismatic Tank
[J]. Ocean Engineering Equipment and Technology, 2014, 1(1): 55-61.
|