YANXING SUO , HAOXIANG GUO , RUIZHE YU , YANG ZHAO . Wearable Sensors for Vital Signs: A Review of 20 Years and Future Directions[J]. Integrated Circuits and Systems, 2024 , 1(4) : 215 -226 . DOI: 10.23919/ICS.2024.3511474

[1]	Straits research,“Wearable sensors market,” Aug. 2022. [Online].

[2]	C. Park, P. H. Chou, Y. Bai, R. Matthews, and A. Hibbs, “An ultra-wearable, wireless, low power ECG monitoring system,” in Proc. IEEE Biomed. Circuits Syst. Conf., 2006, pp. 241-244.

[3]	D. L. T. Wong and Y. Lian, “A wearable wireless ECG sensor with real-time QRS detection for continuous cardiac monitoring,” in Proc. IEEE Biomed. Circuits Syst. Conf., 2012, pp. 112-115.

[4]	Y. Nagasato, S. Izumi, H. Kawaguchi, and M. Yoshimoto, “Capacitively coupled ECG sensor system with digitally assisted noise cancellation for wearable application,” in Proc. IEEE Biomed. Circuits Syst. Conf., 2017, pp. 1-4.

[5]	F. Zhang and Y. Lian, “Wavelet and Hilbert transforms based QRS complexes detection algorithm for wearable ECG devices in wireless body sensor networks,” in Proc. IEEE Biomed. Circuits Syst. Conf., 2009, pp. 225-228.

[6]	L. Wang, B. P. Lo, and G.-Z. Yang, “Multichannel reflective PPG ear-piece sensor with passive motion cancellation,” IEEE Trans. Biomed. Circuits Syst., vol. 1, no. 4, pp. 235-241, Dec. 2007.

[7]	F. Zhang and Y. Lian, “QRS detection based on multiscale mathematical morphology for wearable ECG devices in body area networks,” IEEE Trans. Biomed. Circuits Syst., vol. 3, no. 4, pp. 220-228, Aug. 2009.

[8]	R. G. Haahr et al., “An electronic patch for wearable health monitoring by reflectance pulse oximetry,” IEEE Trans. Biomed. Circuits Syst., vol. 6, no. 1, pp. 45-53, Feb. 2012.

[9]	S.-L. Teng, R. Rieger, and Y.-B. Lin, “Programmable ExG biopotential front-end IC for wearable applications,” IEEE Trans. Biomed. Circuits Syst., vol. 8, no. 4, pp. 543-551, Aug. 2014.

[10]	X. Zhang and Y. Lian, “A 300-mV 220-nW event-driven ADC with real-time QRS detection for wearable ECG sensors,” IEEE Trans. Biomed. Circuits Syst., vol. 8, no. 6, pp. 834-843, Dec. 2014.

[11]	T. Torfs, Y.-H. Chen, H. Kim, and R. F. Yazicioglu, “Noncontact ECG recording system with real time capacitance measurement for motion artifact reduction,” IEEE Trans. Biomed. Circuits Syst., vol. 8, no. 5, pp. 617-625, Oct. 2014.

[12]	U. Ha et al., “A wearable EEG-HEG-HRV multimodal system with simultaneous monitoring of tES for mental health management,” IEEE Trans. Biomed. Circuits Syst., vol. 9, no. 6, pp. 758-766, Dec. 2015.

[13]	J. Xiang, Y. Dong, X. Xue, and H. Xiong, “Electronics of a wearable ECG with level crossing sampling and human body communication,” IEEE Trans. Biomed. Circuits Syst., vol. 13, no. 1, pp. 68-79, Feb. 2019.

[14]	S. Song et al., “A 769 μW battery-powered single-chip SoC with BLE for multi-modal vital sign monitoring health patches,” IEEE Trans. Biomed. Circuits Syst., vol. 13, no. 6, pp. 1506-1517, Dec. 2019.

[15]	Y. Zhao, Z. Shang, and Y. Lian, “A 13.34 μW event-driven patient-specific ANN cardiac arrhythmia classifier for wearable ECG sensors,” IEEE Trans. Biomed. Circuits Syst., vol. 14, no. 2, pp. 186-197, Apr. 2020.

[16]	X. Xu, Q. Cai, Y. Zhao, G. Wang, L. Zhao, and Y. Lian, “A 2.66 µW clinician-like cardiac arrhythmia watchdog based on P-QRS-T for wearable applications,” IEEE Trans. Biomed. Circuits Syst., vol. 16, no. 5, pp. 793-806, Oct. 2022.

[17]	F. Chamberland et al., “Novel wearable HD-EMG sensor with shift-robust gesture recognition using deep learning,” IEEE Trans. Biomed. Circuits Syst., vol. 17, no. 5, pp. 968-984, Oct. 2023.

[18]	F. Dell’Agnola, U. Pale, R. Marino, A. Arza, and D. Atienza, “MBio-Tracker: Multimodal self-aware bio-monitoring wearable system for online workload detection,” IEEE Trans. Biomed. Circuits Syst., vol. 15, no. 5, pp. 994-1007, Oct. 2021.

[19]	C. Lin et al., “Wireless and wearable EEG system for evaluating driver vigilance,” IEEE Trans. Biomed. Circuits Syst., vol. 8, no. 2, pp. 165-176, Apr. 2014.

[20]	Y. Wu, D. Jiang, A. Bardill, R. Bayford, and A. Demosthenous,“A 122 fps, 1 MHz bandwidth multi-frequency wearable EIT belt featuring novel active electrode architecture for neonatal thorax vital sign monitoring,” IEEE Trans. Biomed. Circuits Syst., vol. 13, no. 5, pp. 927-937, Oct. 2019.

[21]	S. Debbarma and S. Bhadra, “A flexible wearable electrooculogram system with motion artifacts sensing and reduction,” IEEE Trans. Biomed. Circuits Syst., vol. 16, no. 2, pp. 324-335, Apr. 2022.

[22]	V. P. Rachim and W. -Y. Chung, “Wearable noncontact armband for mobile ECG monitoring system,” IEEE Trans. Biomed. Circuits Syst., vol. 10, no. 6, pp. 1112-1118, Dec. 2016.

[23]	G. Qian, Y. Suo, Q. Cai, Y.Lian and Y. Zhao, "A 382 nV rms 100 GΩ @50 Hz active electrode for dry-electrode EEG recording", IEEE Trans. Biomed. Circuits Syst., Jun. 2024..

[24]	X. Xu et al., “A dry-electrode enabled ECG-on-chip with arrhythmia-aware data transmission,” Sci. China Inf. Sci., 2025, doi: 10.1007/s11432-024-4196-0.

[25]	X. Xu et al., "A 2.67 GΩ 454nVrms 14.9 μW dry-electrode enabled ECG-on-chip with arrhythmia detection", Proc. IEEE Custom Integr. Circuits Conf., pp. 1-2, 2023.

[26]	Y. Suo et al., “Dry-electrode interface circuit for flexible ECG sensors,” in Proc. IEEE Int. Flexible Electron. Technol. Conf., 2022, pp. 1-2.

[27]	Y. Suo et al., “A gain and bandwidth individually tunable ExG analog frontend with 516 nV rms noise for flexible biomedical sensors,” in Proc. IEEE Int. Symp. Circuits Syst., 2023, pp. 1-5.

[28]	Y. Hou, Y. Zhu, X. Ji, A. G. Richardson, and X. Liu, “A wireless sensor-brain interface system for tracking and guiding animal behaviors through closed-loop neuromodulation in water mazes,” IEEE J. Solid-State Circuits, vol. 59, no. 4, pp. 1093-1109, Apr. 2024.

[29]	M. Ozon et al., “Motion detection and analysis using multimaterial fiber sensors,” IEEE Trans. Circuits Syst. I, Reg. Papers, vol. 70, no. 9, pp. 3522-3533, Sep. 2023.

[30]	S.-H. Kim, S.-M. Ko, and D.-W. Jee, “A pixelated monolithic CMOS PPG sensor for spatial feature acquisition,” IEEE J. Solid-State Circuits, vol. 58, no. 3, pp. 817-826, Mar. 2023.

[31]	N. Modak et al., “EQS Res-HBC: A 65-nm electro-quasistatic resonant 5-240 μW human whole-body powering and 2.19 μW communication SoC with automatic maximum resonant power tracking,” IEEE J. Solid-State Circuits, vol. 57, no. 3, pp. 831-844, Mar. 2022.

[32]	G. Tochou et al., “A sub-100-μW 0.1-to-27-Mb/s pulse-based digital transmitter for the human intranet in 28-nm FD-SOI CMOS,” IEEE J. Solid-State Circuits, vol. 57, no. 5, pp. 1409-1420, May 2022.

[33]	K. Zhao et al., “A binarized CNN-based bowel sound recognition algorithm with time-domain histogram features for wearable healthcare systems,” IEEE Trans. Circuits Syst. II, Exp. Briefs: Exp. Briefs, vol. 69, no. 2, pp. 629-633, Feb. 2022.

[34]	R. Rieger and M. Rif’an, “Integrated ExG, vibration and temperature measurement front-end for wearable sensing,” IEEE Trans. Circuits Syst. I, Reg. Papers, vol. 65, no. 8, pp. 2422-2430, Aug. 2018.

[35]	M. Konijnenburg et al., “A multi(bio)sensor acquisition system with integrated processor, power management, 8 × 8 LED drivers, and simultaneously synchronized ECG, BIO-Z, GSR, and two PPG read outs,” IEEE J. Solid-State Circuits, vol. 51, no. 11, pp. 2584-2595, Nov. 2016.

[36]	C. J. Deepu, X. Zhang, C. H. Heng, and Y. Lian, “A 3-lead ECG- on-chip with QRS detection and lossless compression for wireless sensors,” IEEE Trans. Circuits Syst. II, Exp. Briefs, vol. 63, no. 12, pp. 1151-1155, Dec. 2016.

[37]	X. Zhang, Z. Zhang, Y. Li, C. Liu, Y. X. Guo, and Y. Lian, “A 2.89 μW dry-electrode enabled clockless wireless ECG SoC for wearable applications,” IEEE J. Solid-State Circuits, vol. 51, no. 10, pp. 2287-2298, Oct. 2016.

[38]	N. Van Helleputte et al., “A 345 µW multi-sensor biomedical SoC with bio-impedance, 3-channel ECG, motion artifact reduction, and integrated DSP, ” IEEE J. Solid-State Circuits, vol. 50, no. 1, pp. 230-244, Jan. 2015.

[39]	J. Xu et al., “A wearable 8-channel active-electrode EEG/ETI acquisition system for body area networks,” IEEE J. Solid-State Circuits, vol. 49, no. 9, pp. 2005-2016, Sep. 2014.

[40]	S. Lee, L. Yan, T. Roh, S. Hong, and H.-J. Yoo,“A 75 μW real-time scalable body area network controller and a 25 μW ExG sensor IC for compact sleep monitoring applications,” IEEE J. Solid-State Circuits, vol. 47, no. 1, pp. 323-334, Jan. 2012.

[41]	L. Yan, J. Bae, S. Lee, T. Roh, K. Song, and H.-J. Yoo, “A 3.9 mW 25-electrode reconfigured sensor for wearable cardiac monitoring system,” IEEE J. Solid-State Circuits, vol. 46, no. 1, pp. 353-364, Jan. 2011.

[42]	X. Zou, X. Xu, L. Yao, and Y. Lian, “A 1-V 450-nW fully integrated programmable biomedical sensor interface chip,” IEEE J. Solid-State Circuits, vol. 44, no. 4, pp. 1067-1077, Apr. 2009.

[43]	M. A. Akram, A. Aberra, S.-J.Kweon and S. Ha, "3.6 An amplifier-less CMOS potentiostat IC consuming 3.7 nW power all over 129.5 dB dynamic range for electrochemical biosensing", Proc. IEEE Int. Solid-State Circuits Conf., pp. 64-66, 2024.

[44]	Y.-S. Shu et al., “26.1 A 4.5 mm2 multimodal biosensing SoC for PPG, ECG, BIOZ and GSR acquisition in consumer wearable devices,” in Proc. IEEE Int. Solid-State Circuits Conf., 2020, pp. 400-402.

[45]	G. L. Cerone, A. Botter, and M. Gazzoni, “A modular, smart, and wearable system for high density sEMG detection,” IEEE Trans. Biomed. Eng., vol. 66, no. 12, pp. 3371-3380, Dec. 2019.

[46]	L. Wang et al., “High-density implantable neural electrodes and chips for massive neural recordings,” Brain-X, vol. 2, 2024, pp. 1-23, doi: 10.1002/brx2.65.

[47]	Z. Taufique, B. Zhu, G. Coppola, M. Shoaran, and M. A. B. Altaf, “A low power multi-class migraine detection processor based on somatosensory evoked potentials,” IEEE Trans. Circuits Syst. II, Exp. Briefs, vol. 68, no. 5, pp. 1720-1724, May 2021.

[48]	X. Wang, P.-H. P. Wang, Y. Cao, and P. P. Mercier,“A 0.6 V 75 nW all-CMOS temperature sensor with 1.67 m°C/mV supply sensitivity,” IEEE Trans. Circuits Syst. I, Reg. Papers, vol. 64, no. 9, pp. 2274-2283, Sep. 2017.

[49]	Y.-C. Shih, T. Shen, and B. P. Otis, “A 2.3 μW wireless intraocular pressure/temperature monitor,” IEEE J. Solid-State Circuits, vol. 46, no. 11, pp. 2592-2601, Nov. 2011.

[50]	S.-Y. Lin et al., “A multi-phase series-parallel with bond wire auxiliary fully-integrated 250 pF switched-capacitor with 13.6 mV output ripple for supplying temperature sensor with 0.1 °C accuracy to early detect COVID-19,” in Proc. IEEE Asian Solid-State Circuits Conf., 2021,pp.1-3.

[51]	C. Zhu, E. Schell, M. G. Kim, Z. Bao, and B. Murmann, “Wearable system design using intrinsically stretchable temperature sensor,” in Proc. IEEE Int. Symp. Circuits Syst., 2020, pp. 1-4.

[52]	M. Vaiana et al., “Thermopyle-based contactless temperature sensors for low-power applications,” in Proc. IEEE Int. Symp. Circuits Syst., 2022, pp. 1180-1183.

[53]	S. Wang et al., “Multisensing wearables for real-time monitoring of sweat electrolyte biomarkers during exercise and analysis on their correlation with core body temperature,” IEEE Trans. Biomed. Circuits Syst., vol. 17, no. 4, pp. 808-817, Aug. 2023.

[54]	H. Park et al., “A wireless and wearable body-pressure-monitoring system for the prevention of pressure-induced skin injuries,” IEEE Trans. Biomed. Circuits Syst., vol. 17, no. 5, pp. 889-899, Oct. 2023.

[55]	Y. Chen et al., “A +0.66/-0.73 °C inaccuracy, 1.99-μW time-domain CMOS temperature sensor with second-order ∆Σ modulator and on-chip reference clock, ” IEEE Trans. Circuits Syst. I, Reg. Papers, vol. 67, no. 11, pp. 3815-3827, Nov. 2020.

[56]	B. G. Rosa, S. Anastasova-Ivanova, and G. Z. Yang, “A low-powered and wearable device for monitoring sleep through electrical, chemical and motion signals recorded over the head,” in Proc. IEEE Biomed. Circuits Syst. Conf., 2019, pp. 1-4.

[57]	T. I. Chou et al., “A 1-V 2.6-mW environmental compensated fully integrated nose-on-a-chip,” IEEE Trans. Circuits Syst. II, Exp. Briefs, vol. 65, no. 10, pp. 1365-1369, Oct. 2018.

[58]	B. Lyu, M. Punjiya, Z. Matharu, and S. Sonkusale, “An improved pH mapping bandage with thread-based sensors for chronic wound monitoring,” in Proc. IEEE Int. Symp. Circuits Syst., 2018, pp. 1-4.

[59]	D. Sankhala, P. Rice, S. Muthukumar, and S. Prasad, “SPICE Inverse: Synthesis of an accelerated multiplexed impedance measurement technique for wearable low-power electrochemical systems,” in Proc. IEEE Int. Symp. Circuits Syst., 2020, pp. 1-5.

[60]	P. Marsh et al., “Flexible iridium oxide based pH sensor integrated with inductively coupled wireless transmission system for wearable applications,” IEEE Sensors J., vol. 20, no. 10, pp. 5130-5138, May 2020.

[61]	B. M. G. Rosa, S. Anastasova-Ivanova, and G. Z. Yang, “NFC-powered flexible chest patch for fast assessment of cardiac, hemodynamic, and endocrine parameters,” IEEE Trans. Biomed. Circuits Syst., vol. 13, no. 6, pp. 1603-1614, Dec. 2019.

[62]	J.-C. Chien, S. W. Baker, H. T. Soh, and A. Arbabian, “Design and analysis of a sample-and-hold CMOS electrochemical sensor for aptamer-based therapeutic drug monitoring,” IEEE J. Solid-State Circuits, vol. 55, no. 11, pp. 2914-2929, Nov. 2020.

[63]	I. M. Saied, S. Chandran, and T. Arslan, “Integrated flexible hybrid silicone-textile dual-resonant sensors and switching circuit for wearable neurodegeneration monitoring systems,” IEEE Trans. Biomed. Circuits Syst., vol. 13, no. 6, pp. 1304-1312, Dec. 2019.

[64]	C. N. Teague et al., “A wearable, multimodal sensing system to monitor knee joint health,” IEEE Sensors J., vol. 20, no. 18, pp. 10323-10334, Sep. 2020.

[65]	A. Akinin et al., “An optically addressed nanowire-based retinal prosthesis with wireless stimulation waveform control and charge telemetering,” IEEE J. Solid-State Circuits, vol. 56, no. 11, pp. 3263-3273, Nov. 2021.

[66]	B. Chatterjee et al., “A wearable real-time CMOS dosimeter with integrated zero-bias floating gate sensor and an 861-nW 18-bit energy-resolution scalable time-based radiation to digital converter,” IEEE J. Solid-State Circuits, vol. 55, no. 3, pp. 650-665, Mar. 2020.

[67]	V. Mikos et al., “A wearable, patient-adaptive freezing of gait detection system for biofeedback cueing in Parkinson’s disease,” IEEE Trans. Biomed. Circuits Syst., vol. 13, no. 3, pp. 503-515, Jun. 2019.

[68]	J. K. Park et al., “Noncontact RF vital sign sensor for continuous monitoring of driver status,” IEEE Trans. Biomed. Circuits Syst., vol. 13, no. 3, pp. 493-502, Jun. 2019.

[69]	U. Anwar, T. Arslan, A. Hussain, T. C. Russ, and P. Lomax, “Design and evaluation of wearable multimodal RF sensing system for vascular dementia detection,” IEEE Trans. Biomed. Circuits Syst., vol. 17, no. 5,pp. 928-940, Oct. 2023.

[70]	A. John, K. K. Nundy, B. Cardiff, and D. John, “Multimodal multiresolution data fusion using convolutional neural networks for IoT wearable sensing,” IEEE Trans. Biomed. Circuits Syst., vol. 15, no. 6, pp. 1161-1173, Dec. 2021.

[71]	J. Liu et al., “An ultra-low power reconfigurable biomedical AI processor with adaptive learning for versatile wearable intelligent health monitoring,” IEEE Trans. Biomed. Circuits Syst., vol. 17, no. 5,pp. 952-967, Oct. 2023.

[72]	Y. Wu, D. Jiang, A. Bardill, S. de Gelidi, R. Bayford, and A. Demosthenous, “A high frame rate wearable EIT system using active electrode ASICs for lung respiration and heart rate monitoring,” IEEE Trans. Circuits Syst. I, Reg. Papers, vol. 65, no. 11, pp. 3810-3820, Nov. 2018.

[73]	K. Lee et al., “A multi-functional physiological hybrid-sensing E-skin integrated interface for wearable IoT applications,” IEEE Trans. Biomed. Circuits Syst., vol. 13, no. 6, pp. 1535-1544, Dec. 2019.

[74]	C. J. Deepu, C.-H. Heng, and Y. Lian, “A hybrid data compression scheme for power reduction in wireless sensors for IoT,” IEEE Trans. Biomed. Circuits Syst., vol. 11, no. 2, pp. 245-254, Apr. 2017.

[75]	M. Eggimann, A. Rahimi, and L. Benini,“A 5 μW standard cell memory-based configurable hyperdimensional computing accelerator for always-on smart sensing,” IEEE Trans. Circuits Syst. I, Reg. Papers, vol. 68, no. 10, pp. 4116-4128, Oct. 2021.

[76]	Y. Lu, V. L. Le, and T. T.-H. Kim,“9.7 A 184 µW real-time hand-gesture recognition system with hybrid tiny classifiers for smart wearable de-vices,” in Proc. IEEE Int. Solid-State Circuits Conf., 2021, pp. 156-158.

[77]	C.-J. Yang, N. Fahier, C.-Y. He, W.-C. Li, and W.-C. Fang, “An AI-edge platform with multimodal wearable physiological signals monitoring sensors for affective computing applications,” in Proc. IEEE Int. Symp. Circuits Syst., 2020, pp. 1-5.

[78]	F. Tian et al., “BOLS: A bionic sensor-direct on-chip learning system with direct-feedback-through-time for personalized wearable health monitoring,” in Proc. IEEE Int. Symp. Circuits Syst., 2024, pp. 1-5.

[79]	Q. Cai, X. Xu, Y. Zhao, L. Ying, Y. Li, and Y. Lian, “A 1.3 μW event-driven ANN core for cardiac arrhythmia classification in wearable sensors,” IEEE Trans. Circuits Syst. II, Exp. Briefs, vol. 68, no. 9, pp. 3123-3127, Sep. 2021.

[80]	M. Douthwaite, F. García-Redondo, P. Georgiou, and S. Das, “A time-domain current-mode MAC engine for analogue neural networks in flexible electronics,” in Proc. IEEE Biomed. Circuits Syst. Conf., 2019,pp.1-4.

[81]	A. Tahir, Z. An, S. Bai, and M. Shen, “Robust payload recognition based on sensor-over-muscle-independence deep learning for the control of exoskeletons,” IEEE Trans. Circuits Syst. II, Exp. Briefs: Exp. Briefs, vol. 70, no. 9, pp. 3699-3703, Sep. 2023.

[82]	A. Jafari, A. Ganesan, C. S. K. Thalisetty, V. Sivasubramanian, T. Oates, and T. Mohsenin, “SensorNet: A scalable and low-power deep convolutional neural network for multimodal data classification,” IEEE Trans. Circuits Syst. I, Reg. Papers, vol. 66, no. 1, pp. 274-287, Jan. 2019.

[83]	M. Y. Ahmed, E. Nemati, N. Rashid, M. Shurpo, J. Kuang, and A. Gao, “Power optimized smartwatch-earbuds multimodal system for monitoring activities of daily living,” in Proc. 45th Annu. Int. Conf. IEEE Eng. Med. Biol. Soc., 2023, pp. 1-7.

[84]	S.-J. Jung et al., “28.2 A 400-to-1000 nm 24 μW monolithic PPG sensor with 0.3 A/W spectral responsivity for miniature wearables,” in Proc. IEEE Int. Solid-State Circuits Conf., 2021, pp. 1-3.

[85]	M. Hanson et al., “Body area sensor networks: Challenges and opportunities,” Computer, vol. 42, no. 1, pp. 58-65, 2009.

[86]	Z. Liu et al., “A body-wide RF energy harvester based on textile surface plasmonic antenna array for wearable wireless power transmission,” IEEE Trans. Circuits Syst. II, Exp. Briefs: Exp. Briefs, vol. 70, no. 4, pp. 1470-1474, Apr. 2023.

[87]

A. Costilla Reyes, A. Abuellil, J. J. Estrada-López, S. Carreon-Bautista, and E. Sánchez-Sinencio, “Reconfigurable system for electromagnetic energy harvesting with inherent activity sensing capabilities for wearable technology,” IEEE Trans. Circuits Syst. II, Exp. Briefs, vol. 66, no. 8, pp. 1302-1306, Aug. 2019.

[88]	L. Yan, J. Yoo, B. Kim, and H.-J. Yoo, “A 0.5-μVrms 12-μW wirelessly powered patch-type healthcare sensor for wearable body sensor network,” IEEE J. Solid-State Circuits, vol. 45, no. 11, pp. 2356-2365, Nov. 2010.

[89]	T. H. Teo et al., “A 700-μW wireless sensor node SoC for continuous real-time health monitoring,” IEEE J. Solid-State Circuits, vol. 45, no. 11, pp. 2292-2299, Nov. 2010.

[90]	J. Yoo, L. Yan, S. Lee, Y. Kim, and H.-J. Yoo,“A 5.2 mW self-configured wearable body sensor network controller and a 12 μW wirelessly powered sensor for a continuous health monitoring system,” IEEE J. Solid-State Circuits, vol. 45, no. 1, pp. 178-188, Jan. 2010.

[91]	Y.-W. Chong, W. Ismail, K. Ko, and C.-Y. Lee, “Energy harvesting for wearable devices: A review,” IEEE Sensors J., vol. 19, no. 20,pp. 9047-9062, Oct. 2019.

[92]	J. Lee, Y. Kim, D. Kang, I. Song, and B. Lee, “A reconfigurable bidirectional wireless power and full-duplex data transceiver IC for wearable biomedical applications,” IEEE Trans. Biomed. Circuits Syst., early access, Oct. 21, 2024, doi: 10.1109/TBCAS.2024.3483950.

[93]	V. Leonov, “Thermoelectric energy harvesting of Human body heat for wearable sensors,” IEEE Sensors J., vol. 13, no. 6, pp. 2284-2291, Jun. 2013.

[94]	Y. Yano et al., “An IoT sensor node SoC with dynamic power scheduling for sustainable operation in energy harvesting environment,” in Proc. IEEE Asian Solid-State Circuits Conf., 2019, pp. 267-270.