海洋工程装备与技术 ›› 2018, Vol. 5 ›› Issue (2): 143-148.doi: 10.12087/oeet.2095-7297.2018.02.13

• 专刊:水下生产系统设计与应用 • 上一篇    下一篇

文昌10-3项目水下脐带缆终端设计中的难点与解决方案

钟文军, 方伟, 顾永维   

  1. 海洋石油工程股份有限公司,天津300451
  • 收稿日期:2017-11-01 修回日期:2018-02-07 出版日期:2018-04-25 发布日期:2018-04-16
  • 作者简介:钟文军(1965—),男,教授级高级工程师,主要从事海洋工程方面的工作。《海洋工程装备与技术》编委。
  • 基金资助:
    国家科技重大专项(2016ZX05057)

Challenge and Solution of Subsea Umbilical Termination Unit Design in Wenchang 10-3 Project

ZHONG Wen-jun, FANG Wei, GU Yong-wei   

  1. Offshore Oil Engineering Co., Ltd., Tianjin 300451, China
  • Received:2017-11-01 Revised:2018-02-07 Online:2018-04-25 Published:2018-04-16

摘要: 基于文昌10-3项目水下脐带缆终端的设计经验,结合厂家供货设备的特点,重点针对系统集成设计过程中遇到的问题和相关技术,进行了分析和总结。所采用的设计模式,突破了脐带缆终端系统由国外一体供货的固有做法,提高了我国自主研发的能力,加强了国产化技术储备的深度,为未来的深水油气开发奠定了良好的基础。

Abstract: Based on the design experience of subsea umbilical termination unit (SUTU) in Wenchang 10-3 project, the challenges and relevant technologies, which focus on the system integration design and characteristics of supply equipment, are analyzed and summarized. The SUTU system design was completely controlled by foreign supplier before. The design mode adopted in Wenchang 10-3 project will improve our independent research and development capacities, reinforce the localization of technical reserves, and provide a good basis for the future deepwater oil and gas development.

中图分类号: