Abstract:Flameproof three-phase asynchronous motor is widely used in dangerous areas of offshore platforms. For this kind of motor, failure mostly occurs in bearings or bearing shells. On an offshore platform in Bohai, a medium-sized high-voltage flameproof motor was shut down normally and then restarted. In the restart process, the motor vibrated, showing a suddenly increasing current and abnormal noise. Inspection showed that there was no problem in the motor bearing, so plane shaft failure was considered. The reasons for the failure of the flameproof surface and shaft of the bearing chamber of the medium-sized high-pressure flameproof motor are analyzed, and the method of repairing the damaged motor's flameproof surface and rotor shaft is described.
1 卫翠粉,文斌.大中型隔爆动电机的隔爆结构设计[J].电机技术,2014(4): 40.
Wei Cui-fen, Wen Bin. dIICT flame-proof structure of the large and medium-sized flame-proof motor design [J]. Electrical Machinery Technology, 2014(4): 40.
2 国家质量监督检验检疫总局,国家标准化管理委员会.GB 3836.2—2010.爆炸性环境,第2部分: 由隔爆外壳“d”保护的设备[S]. 2010.
General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China.GB 3836.2—2010. Explosive atmospheres—Part 2. Equipment protection by flameproof enclosures “d” [S]. 2010.
3 国家质量监督检验检疫总局,国家标准化管理委员会.GB/T 13957—2008.大型三相异步电动机基本系列技术条件[S].2008.
General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China. GB/T 13957—2008. Technical requirement for the fundamental series of three-phase large asynchronous motor [S]. 2008.
4 建设部,国家质量监督检验检疫总局.GB 50170—2006.电气装置安装工程旋转电机施工及验收规范[S]. 2006.
Ministry of Construction, General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China. GB 50170—2006. Code for construction and acceptance of rotating electrical machines electric equipment installation engineering [S]. 2006.