Optimization Design of Tubing Hanger Outlet Angle of Horizontal Tree

Abstract

Abstract:

Aiming at the engineering problem of flow loss, an optimization design method of tubing hanger outlet is proposed on the basis of drag coefficient method, which considers the structural characteristics of tubing hanger, as well as the position and function of tubing hanger. By using the FLUENT software, a finite element model for tubing hanger is developed and the fluid flow in the tubing hanger is simulated. The results obtained by the drag coefficient method and the numerical results show that the best tubing hanger outlet angle is between 11° and 12°.

Key words: subsea pipeline, horizontal tree, tubing hanger, outlet angle, optimal design

CLC Number:

TE973.92

Rui QIN, Qing-ping LI, Xiao-lan LUO, Meng-lan DUAN. Optimization Design of Tubing Hanger Outlet Angle of Horizontal Tree[J]. Ocean Engineering Equipment and Technology, 2015, 2(1): 50-54.

Figures/Tables 13

Fig.1

Fig.2

Fig.3

Fig.4

Fig.5

Fig.6

Fig.7

Fig.8

Fig.9

Fig.10

Table 1

Fig.11

Fig.12

角度/(°)	0	8	10	11	12	15
平均速度/(m·s^-1)	1.432785	1.412275	1.412581	1.412123	1.412260	1.412544
角度/(°)	17	18	20	25	30	35
平均速度/(m·s^-1)	1.412925	1.413046	1.413353	1.414051	1.414337	1.414798

[1]	Eric D, Larson P E, Kevin G K.Marginal subsea development with existing subsea trees[C]. OTC, 2004:16533.
[2]	Lafitte J I, Perrot M, Lesgent J, et al.Dalia subsea production system:presentation and challenges[C]. OTC, 2007:18541.
[3]	Picciani F, Luce R.North Bardawil development project[C]. SPE, 2010:130281.
[4]	ABB. HT subsea horizontal tree general presentation[R]. 2008.
[5]	华绍曾,杨学宁.实用流体阻力手册[M].北京:国防工业出版社,1985.
[6]	杨莜蘅,张国忠.输油管道设计与管理[M].东营:石油大学出版社,1996.

[1]	LUO Shi-yong, WANG De-jun, LIU Xiao-xia, HUANG Jun. Application of Flexible Pipe in Deepwater Subsea Pipeline [J]. Ocean Engineering Equipment and Technology, 2018, 5(增刊): 53-56.
[2]	WANG Chao. Small Groove SMAW Process Experiment Investigation in Deepwater Subsea Pipeline Welding [J]. Ocean Engineering Equipment and Technology, 2018, 5(增刊): 65-68.
[3]	SUN Guo-min, ZHANG Jie, Xü Zhi-hui. Damage Assessment of In-Service Subsea Pipeline [J]. Ocean Engineering Equipment and Technology, 2018, 5(6): 400-404.
[4]	XING Guang-kuo, WANG Chang-tao, WANG Feng-yun, ZHANG Mei-rong, ZHANG Peng-fei. Installation Analysis of S-Lay Pipeline End Termination [J]. Ocean Engineering Equipment and Technology, 2018, 5(2): 129-132.
[5]	WANG Meng, ZHAO Dong-yan. Strength Assessment on Corroded Subsea Pipeline Based on the Code of DNV-RP-F101 [J]. Ocean Engineering Equipment and Technology, 2017, 4(5): 276-280.
[6]	HUANG Yu, BAO Jia. Development in Deepwater Pipe Laying [J]. Ocean Engineering Equipment and Technology, 2017, 4(5): 281-286.
[7]	LIU You-li, XIONG Rui, YUAN Ju-yang, HONG Sen. Application of New Field Joint Coating Process to Subsea Pipeline Laying [J]. Ocean Engineering Equipment and Technology, 2017, 4(3): 168-172.
[8]	YANG Lian-feng, ZHANG Xiao-jian. Application of Wet Recovery Technology in the Process of Subsea Pipeline Repairing [J]. Ocean Engineering Equipment and Technology, 2016, 3(4): 217-221.
[9]	WANG Yu, ZHANG Jun-bin, JIANG Shi-quan, LIU Yong-feng, HAO Xi-ning. Selection Study of Deepwater Subsea Christmas Tree System [J]. Ocean Engineering Equipment and Technology, 2016, 3(2): 85-92.
[10]	JIA Zhen. Development of an Auto On-Off Pouring Mold Used in Field Joint Installation of GSPU Thermal Insulation Pipe [J]. Ocean Engineering Equipment and Technology, 2016, 3(1): 52-57.
[11]	Ning ZHANG, Jia-you MAO, Jian-jun YANG. Subsea Christmas Tree Tubing Hanger Installation by Simplified Landing String [J]. Ocean Engineering Equipment and Technology, 2015, 2(3): 145-151.
[12]	Xiu-feng LI, Xian-hong FENG. Subsea Pipeline Span Analysis Based on Fatigue Life [J]. Ocean Engineering Equipment and Technology, 2015, 2(3): 196-200.
[13]	Hao BAI, Meng-na ZHANG, Xiao-hong SHEN, Hai-yan WANG. Design of Low-Power Platform for Deepwater Riser Underwater Monitoring [J]. Ocean Engineering Equipment and Technology, 2015, 2(2): 133-137.
[14]	Jie ZHANG, Guo-min SUW, Hong-qi MA, Guo-yang LAN. Subsea Pipeline Appendage Finite Element Analysis and Comparison of Different Checking Criteria [J]. Ocean Engineering Equipment and Technology, 2015, 2(2): 93-98.
[15]	Jing YE, Lie-jin GUO, Sen-lin CHEN, Qing-ping LI, Nai-liang LI. Comparative Experimental Study on Severe Slugging Characteristics in Different Riser Shapes [J]. Ocean Engineering Equipment and Technology, 2015, 2(1): 18-22.