海洋工程装备与技术

• 海洋资源开发利用技术与装备 • 上一篇    下一篇

立式建造导管架的尺寸控制方法

荆鹏, 赵国华, 杨青峰, 李春雷, 刘荣坤   

  1. (海洋石油工程股份有限公司,山东 青岛266555)
  • 收稿日期:2018-04-13 修回日期:2018-05-30 出版日期:2018-10-25 发布日期:2018-10-25
  • 基金资助:
    荆鹏(1981—),男,工程师,主要从事海洋石油工程精度控制方面的研究。

Method of Dimensional Control for Vertically Constructed Jacket

JING Peng, ZHAO Guo-hua, YANG Qing-feng, LI Chun-lei, LIU Rong-kun   

  1. (Offshore Oil Engineering Co., Ltd., Qingdao, Shandong 266555, China)
  • Received:2018-04-13 Revised:2018-05-30 Online:2018-10-25 Published:2018-10-25

摘要: 导管架陆地建造过程中,尺寸控制是极其重要的一环。导管架建造工艺不同,尺寸控制方法也各有特点。浅水导管架通常采用立式建造的工艺方式。在总结近几年立式建造导管架尺寸控制经验的基础上,详细阐述了立式建造导管架在管卷制接长阶段、片预制阶段以及场地总装阶段的尺寸控制方法,总结了各阶段尺寸控制的要点、容易出现的错误及解决方法,并提出一种新基准线法作为总装阶段的尺寸控制方法。

Abstract: Dimensional control is one of the important parts in process of jacket construction on land. There are different dimensional control methods depending on the construction technology. The jackets located in shallow waters usually are constructed by vertical process. As a summary of dimensional control experience of vertically constructed jackets in recent years, this paper introduces the dimensional control methods used at the stages of tubular splicing, frame prefabricating and field assembling. The dimensional control key points, common mistakes and solutions at each stage of jacket construction are also illustrated. Moreover, a new dimensional control method of jacket construction at field assembling stage is proposed.

中图分类号: